If you want assistance on your R-JTAG installation, you MUST post complete the following fields:
Console Type: (Zephyr/Falcon/Opus/Jasper)
NAND size: 16/256/512
Dashboard version: e.g 2.0.16202
CB version: e.g 5774
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):
(2 cycles is enough)
updflash.bin log (if applicable):
Image of R-JTAG board:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem:
Was the console working before you started: Y/N
(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
POSTING FOR HELP WITHOUT THESE FIELDS COMPLETED MAY RESULT ON IT BEING DELETED WITHOUT WARNING.
We're trying to help you, so we need the important information up-front. Please help us to do this effectively!
Console Type: (Zephyr/Falcon/Opus/Jasper)
NAND size: 16/256/512
Dashboard version: e.g 2.0.16202
CB version: e.g 5774
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):
(2 cycles is enough)
updflash.bin log (if applicable):
Image of R-JTAG board:
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem:
Was the console working before you started: Y/N
(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
WARNING
POSTING FOR HELP WITHOUT THESE FIELDS COMPLETED MAY RESULT ON IT BEING DELETED WITHOUT WARNING.
We're trying to help you, so we need the important information up-front. Please help us to do this effectively!