Today I found a weird cpu rst wire placement that yields instant boot for my rgh 2 jasper on newest dash , I ran the cpu rst wire tightly to the top of the usb port hub in front of console and pinned it under the ground pin on top , then ran wire to memory port closest to the rf board and hot glued it there , then straight through gpu heatsink to cr3 lite ,
On dip switch s4 I used 4
And s2 I used 4 and 7
Timing file rgh 2 c
Insta boots all day
Hope this helps
On dip switch s4 I used 4
And s2 I used 4 and 7
Timing file rgh 2 c
Insta boots all day
Hope this helps