Hello fellows and Merry christmas,
I have a Jasper elite 16mb nand a long now and I still haven't managed to glitch it
The Jasper has a CB 6750 and dashboard version 2.0.7363.0 which is glitchable. I wanted to get the cpu/dvd key because I've losted the dvd key (liteon)
I've dumped the nand several times (lpt cable and later from a pic) compared and check a had matched nands, Then I made the ecc with several programs like 360 Multi Builder and J-runner and wrote it to the nand. I programmed the CoolRunner rev c with Jasper RGH time 1.0/1.1 from 360gc prog and also from J-Runner
The thing is that It won't glitch the green led which from what I read it shows the pulses for the cpu reset may flash several times and then it stops. The flashes depends from the connectivity, I connect a decoupling Capacitor from point A (Pll_Bypass) to GND and I got for examples 2 or 3 flashes and then it stops. I disconect the capacitor and I get 1 flash and then it stops. I do some other compinactions as well but I get till 5 flashes and then stops.
My guesses is that my problem is at the point A (Pll_Bypass), Cause when I disconnected it and leave the wire at the air the CoolRunner keeps flashes for ever.
here are some photos
20131225_IMG_0792.JPG20131225_IMG_0793.jpg20131225_IMG_0794.JPG20131225_IMG_0795.jpg20131225_IMG_0797.JPG20131225_IMG_0798.jpg20131225_IMG_0799.JPG20131225_IMG_0800.JPG
As you can see I've messed up some points cause I've used cat 6 one wire cable...
I had a problem at point B (stdby_clk) and my xbox wouldn't turn on but I fixed that as you can see
Also I've used the blue wire and also the white as well for the point D (CPU_RST)
The thing is that when I flash the stock nand back I get an 0022 error (at aprox 30 sec)and from what I've read at 30 sec it is the gpu but i think it have to do with the ldv (damn efuses I didn't disable to prevent it)
when i'm on the ecc image it doesn't show any error
If someone can point me to the right direction I would really appreciate that
thank you in advance
(If you need any more info about the console just tell me and I'll post them)
I have a Jasper elite 16mb nand a long now and I still haven't managed to glitch it
The Jasper has a CB 6750 and dashboard version 2.0.7363.0 which is glitchable. I wanted to get the cpu/dvd key because I've losted the dvd key (liteon)
I've dumped the nand several times (lpt cable and later from a pic) compared and check a had matched nands, Then I made the ecc with several programs like 360 Multi Builder and J-runner and wrote it to the nand. I programmed the CoolRunner rev c with Jasper RGH time 1.0/1.1 from 360gc prog and also from J-Runner
The thing is that It won't glitch the green led which from what I read it shows the pulses for the cpu reset may flash several times and then it stops. The flashes depends from the connectivity, I connect a decoupling Capacitor from point A (Pll_Bypass) to GND and I got for examples 2 or 3 flashes and then it stops. I disconect the capacitor and I get 1 flash and then it stops. I do some other compinactions as well but I get till 5 flashes and then stops.
My guesses is that my problem is at the point A (Pll_Bypass), Cause when I disconnected it and leave the wire at the air the CoolRunner keeps flashes for ever.
here are some photos
20131225_IMG_0792.JPG20131225_IMG_0793.jpg20131225_IMG_0794.JPG20131225_IMG_0795.jpg20131225_IMG_0797.JPG20131225_IMG_0798.jpg20131225_IMG_0799.JPG20131225_IMG_0800.JPG
As you can see I've messed up some points cause I've used cat 6 one wire cable...
I had a problem at point B (stdby_clk) and my xbox wouldn't turn on but I fixed that as you can see
Also I've used the blue wire and also the white as well for the point D (CPU_RST)
The thing is that when I flash the stock nand back I get an 0022 error (at aprox 30 sec)and from what I've read at 30 sec it is the gpu but i think it have to do with the ldv (damn efuses I didn't disable to prevent it)
when i'm on the ecc image it doesn't show any error
If someone can point me to the right direction I would really appreciate that
thank you in advance
(If you need any more info about the console just tell me and I'll post them)