FIXED Falcon not booting xell

Console Type: Falcon
NAND size: 16
Dashboard version: 16547
CB version: 5774
Screenshot of NAND details from J-Runner:

Nand details.jpg

J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):

My Rater Screenshot.png

updflash.bin log (if applicable):
Image of R-JTAG board:

R-JTAG.jpg
Images of close-up soldering to motherboard:

Post_QSB.jpg
JTAG_QSB.jpg
Q2N1.jpg
CPU_RST.jpg
Description of problem:

As you can see in the rater log I have a Post B3 - Panic - SHA_VERIFY issue.
The nanddump has a bad block @7 and @11B
• Bad Block ID @ 0x7 [Offset: 0x1CE00]
• Bad Block ID @ 0x11B [Offset: 0x48F600]




• Bad Block ID @ 0x7 Found @ 0x3FF[Offset: 0x107BE00]
• Bad Block ID @ 0x11B Found @ 0x3FE[Offset: 0x1077C00]
Could this be why it can't boot to xell ?

Already tried all of the dipswitch setting and the best working is 4-7 and 1,8v


Was the console working before you started: Y

Attached Images

• Nand details.jpg (67.6 KB)
• My Rater Screenshot.png (65.5 KB)
• R-JTAG.jpg (97.6 KB)
• Post_QSB.jpg (47.0 KB)
• JTAG_QSB.jpg (51.2 KB)
• Q2N1.jpg (60.5 KB)
• CPU_RST.jpg (73.5 KB)