I have started my 1st trinity 4gb rgh, once I read nand 2x and they match I create ecc and when I write ecc I get no errors but after unplugging for 10sec and try to boot via eject I get no green pulse from cr rev c. I have programmed trinity files in both prog and nor mode. I get a green and red when it is programming. When trying to boot xell with ecc written the fan seems to do this slight increase in revs every so often, not sure if it's as often as the console is trying to glitch. I have not tried anything with the jp or bridging anything on the actual cr. I'm on my mobile so not sure how to upload pics but will try to upload when I get home from work. Thanks, let me know if you need anymore info.
↧