Hi everybody.
I have a Corona V1 xbox360, and this is a first time RGH execution.
To read NAND by using JR Programmer V2( Abbreviated as JRP below ),I soldered using Corona QSB Install Kit V3.
After soldering ( in fact this was poor soldering), anyway,
I started the JR under windows7. But JR stopped without NAND read, issuing the following message.
---------------------------------------------
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
---------------------------------------------
At that time, I did next several things,
1) review the solder part and partial re-soldering ( but finally failed)
2) restart JR on PC several times
3) re-connect the USB connection of the JRP and PC,
4) press the PF2 key on PC,
5) select several menus of JR, namely such as powerup menu,
etc.
But, JRP didn't read NAND.
The console outputs at that time are shown in the end of this post.
In order to confirm whether xbox boot up normally, I have removed all solder part, including the QSB kit.
Only a)HDMI cable for monitor, b)power supply, c)powerup switch are connected.
After power-on , immediately the center portion of the switch is lit green LED only 1-2 seconds,
then the center lights up a red LED next, no other reaction happens. Nothing is displayed on the monitor.
My xbox is broken? I destroyed my motherboard ?
In order to repair, I have searched team xecuters Forum, but, similar problems are not found.
At least I can't find.
What should I do next ? What should I examine my motherboard ?
Somewhere , or there will not be the solution to the case similar ?
Should I talk to another Forum instead of this forum ?
Please tell me, help me.
================================================== =
2014/04/30 19:28:59
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
================================================== =
2014/04/30 23:51:42
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0xFFFFFFFF
IoTimedOut
IoTimedOut:No more bytes!
FFFFFFFF
Checking Console..
Version: 10
Flash Config: 0xFFFFFFFF
IoTimedOut
IoTimedOut:No more bytes!
FFFFFFFF
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 00
Wrong Version.
Can not continue
Checking Console..
Version: 00
Wrong Version.
Can not continue
================================================== =
2014/04/30 23:57:00
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 00
Wrong Version.
Corona Manually Selected
Version: 00
Wrong Version.
Checking Console..
Version: 00
Wrong Version.
Can not continue
Checking Console..
Version: 00
Wrong Version.
Can not continue
================================================== =
2014/05/01 0:15:52
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Power Up
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Shutdown
Tip: Load the nand on source to have quicker results.
Scanning......
No Xbox Detected
Finished
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Corona Manually Selected
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
================================================== =
2014/05/01 5:57:18
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
================================================== =
2014/05/0 11:33:04
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
================================================== =
2014/05/01 11:37:33
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 00
Wrong Version.
Can not continue
================================================== =
2014/05/01 21:44:07
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 00
Wrong Version.
Corona Manually Selected
Version: 00
Wrong Version.
Checking Console..
Version: 00
Wrong Version.
Can not continue
Version: 00
Wrong Version.
Version: 00
Wrong Version.
================================================== =
2014/05/01 21:50:50
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 00
Wrong Version.
Corona Manually Selected
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
================================================== =
2014/05/01 21:55:41
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Power Up
Power Up
Update
Checking Console..
Version: 00
Wrong Version.
Can not continue
:confused:
I have a Corona V1 xbox360, and this is a first time RGH execution.
To read NAND by using JR Programmer V2( Abbreviated as JRP below ),I soldered using Corona QSB Install Kit V3.
After soldering ( in fact this was poor soldering), anyway,
I started the JR under windows7. But JR stopped without NAND read, issuing the following message.
---------------------------------------------
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
---------------------------------------------
At that time, I did next several things,
1) review the solder part and partial re-soldering ( but finally failed)
2) restart JR on PC several times
3) re-connect the USB connection of the JRP and PC,
4) press the PF2 key on PC,
5) select several menus of JR, namely such as powerup menu,
etc.
But, JRP didn't read NAND.
The console outputs at that time are shown in the end of this post.
In order to confirm whether xbox boot up normally, I have removed all solder part, including the QSB kit.
Only a)HDMI cable for monitor, b)power supply, c)powerup switch are connected.
After power-on , immediately the center portion of the switch is lit green LED only 1-2 seconds,
then the center lights up a red LED next, no other reaction happens. Nothing is displayed on the monitor.
My xbox is broken? I destroyed my motherboard ?
In order to repair, I have searched team xecuters Forum, but, similar problems are not found.
At least I can't find.
What should I do next ? What should I examine my motherboard ?
Somewhere , or there will not be the solution to the case similar ?
Should I talk to another Forum instead of this forum ?
Please tell me, help me.
================================================== =
2014/04/30 19:28:59
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
================================================== =
2014/04/30 23:51:42
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0xFFFFFFFF
IoTimedOut
IoTimedOut:No more bytes!
FFFFFFFF
Checking Console..
Version: 10
Flash Config: 0xFFFFFFFF
IoTimedOut
IoTimedOut:No more bytes!
FFFFFFFF
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 00
Wrong Version.
Can not continue
Checking Console..
Version: 00
Wrong Version.
Can not continue
================================================== =
2014/04/30 23:57:00
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 00
Wrong Version.
Corona Manually Selected
Version: 00
Wrong Version.
Checking Console..
Version: 00
Wrong Version.
Can not continue
Checking Console..
Version: 00
Wrong Version.
Can not continue
================================================== =
2014/05/01 0:15:52
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Power Up
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Shutdown
Tip: Load the nand on source to have quicker results.
Scanning......
No Xbox Detected
Finished
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Corona Manually Selected
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
================================================== =
2014/05/01 5:57:18
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
================================================== =
2014/05/0 11:33:04
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
================================================== =
2014/05/01 11:37:33
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 00
Wrong Version.
Can not continue
================================================== =
2014/05/01 21:44:07
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 00
Wrong Version.
Corona Manually Selected
Version: 00
Wrong Version.
Checking Console..
Version: 00
Wrong Version.
Can not continue
Version: 00
Wrong Version.
Version: 00
Wrong Version.
================================================== =
2014/05/01 21:50:50
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Version: 00
Wrong Version.
Corona Manually Selected
Version: 10
Flash Config: 0x00000000
Can not Continue
Version: 10
Flash Config: 0x00000000
Can not Continue
================================================== =
2014/05/01 21:55:41
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Version: 10
Flash Config: 0x00000000
Can not Continue
Power Up
Power Up
Update
Checking Console..
Version: 00
Wrong Version.
Can not continue
:confused: