Console Type: Falcon
NAND size: 16
Dashboard version: 2.0.16202
CB version: 5774
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
POST output from J-Runner (either POST_OUT monitor or RATER output):
(2 cycles is enough)
updflash.bin log (if applicable):
Image of R-JTAG board:
Images of close-up soldering to motherboard:
(attach images to your post)
Was the console working before you started: Y
Description of problem:
I'm having a bit of trouble with a Falcon R-JTAG that will boot to XeLL no problem every time, but won't boot freeBOOT dash.
It goes through all the post codes up to Post 79 - LOAD_XAM but no green lights and nothing on the screen. Sometimes it finishes on a different POST in the 70's.
I've tried top and bottom CPU reset points and default and 1.2v but
Here are the pics:
![]()
![]()
![]()
![]()
![]()
![]()
The one suspicion I have is that there is a bad block here:
Any help much appreciated.
Thanks
![]()
NAND size: 16
Dashboard version: 2.0.16202
CB version: 5774
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
Code:
===================================================
09 August 2014 14:51:35
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Trinity
RGH2 Selected
Nand Initialization Finished
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Aud_Clamp Selected
R-Jtag Selected
Load Files Initiliazation Finished
Clean SMC detected
Patching Jasper version 2.3 SMC at offset 0x12BA
16747
Started Creation of the 16747 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.12.659
---------------------------------------------------------------
base path changed to C:\Utils\JRunner\xeBuild
---- { Image Build Mode } ----
building jtag image
******* WARNING: could not patch SMC reset limit!
---------------------------------------------------------------
C:\Utils\JRunner\301585683305\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16747.0
Console : Falcon
NAND size : 16MiB
Build : JTAG
Xell : power on console with console eject button
Serial : 301585683305
ConsoleId : 022057510619
MoboSerial: 7578471110738325
Mfg Date : 08/09/2008
CPU Key : 5AEA76B018A2AA8FF1916AA6AFA86B73
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : DAB5EFDA2178553544C5AACB7EB31E90
CF LDV : 13
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Utils\JRunner\301585683305
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Initializing nanddump1.bin..
Falcon/Opus
Nand Initialization Finished(2 cycles is enough)
updflash.bin log (if applicable):
Image of R-JTAG board:
Images of close-up soldering to motherboard:
(attach images to your post)
Was the console working before you started: Y
Description of problem:
I'm having a bit of trouble with a Falcon R-JTAG that will boot to XeLL no problem every time, but won't boot freeBOOT dash.
It goes through all the post codes up to Post 79 - LOAD_XAM but no green lights and nothing on the screen. Sometimes it finishes on a different POST in the 70's.
I've tried top and bottom CPU reset points and default and 1.2v but
Here are the pics:
Code:
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 30 - VERIFY_OFFSET_4BL_CD
Post 06
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 87 - Panic - ALIGNMENT
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 2E - HWINIT
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 42 - FETCH_HEADER
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 48 - SHA_COMPUTE
Post 4B - LZX_EXPAND
Post 4E - FETCH_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF
Post 51 - LOAD_UPDATE_2
Post 50 - LOAD_UPDATE_1
Post 52 - BRANCH
Post 58 - INIT_HYPERVISOR
Post 5A - INIT_XEX_TRAINING
Post 60 - INIT_KERNEL
Post 61 - INIT_HAL_PHASE_0
Post 63 - INIT_KERNEL_DEBUGGER
Post 64 - INIT_MEMORY_MANAGER
Post 65 - INIT_STACKS
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post 69 - INIT_KEY_VAULT
Post 6A - INIT_HAL_PHASE_1
Post 6B - INIT_SFC_DRIVER
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 23 - INIT_SYSRAM
Post 31 - FETCH_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 47 - RC4_DECRYPT
Post 4B - LZX_EXPAND
Post 4D - DECODE_FUSES
Post 4E - FETCH_OFFSET_6BL_CF
Post 51 - LOAD_UPDATE_2
Post 52 - BRANCH
Post 59 - INIT_SOC_MMIO
Post 5A - INIT_XEX_TRAINING
Post 5B - INIT_KEYRING
Post 5C - INIT_KEYS
Post 5F
Post 60 - INIT_KERNEL
Post 61 - INIT_HAL_PHASE_0
Post 62 - INIT_PROCESS_OBJECTS
Post 63 - INIT_KERNEL_DEBUGGER
Post 64 - INIT_MEMORY_MANAGER
Post 65 - INIT_STACKS
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post 69 - INIT_KEY_VAULT
Post 6A - INIT_HAL_PHASE_1
Post 6C - INIT_SECURITY
Post 6D - INIT_KEY_EX_VAULT
Post 6E - INIT_SETTINGS
Post 6F - INIT_POWER_MODE
Post 70 - INIT_VIDEO_DRIVER
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init
Post 73 - INIT_SATA_DRIVER
Post 75 - INIT_DUMP_SYSTEM
Post 76 - INIT_SYSTEM_ROOT
Post 77 - INIT_OTHER_DRIVERS
Post 78 - INIT_STFS_DRIVER
Post 79 - LOAD_XAM
Most Fails(cumulative): 0x21
Most Fails(cumulative): 0xA0
Shutdown
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 30 - VERIFY_OFFSET_4BL_CD
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 2E - HWINIT
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post 3A - BRANCH
Post 40 - Entrypoint of CD reached
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 48 - SHA_COMPUTE
Post 4B - LZX_EXPAND
Post 4E - FETCH_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF
Post 51 - LOAD_UPDATE_2
Post 50 - LOAD_UPDATE_1
Post 52 - BRANCH
Post 58 - INIT_HYPERVISOR
Post 5A - INIT_XEX_TRAINING
Post 60 - INIT_KERNEL
Post 61 - INIT_HAL_PHASE_0
Post 62 - INIT_PROCESS_OBJECTS
Post 64 - INIT_MEMORY_MANAGER
Post 65 - INIT_STACKS
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post 69 - INIT_KEY_VAULT
Post 6A - INIT_HAL_PHASE_1
Post 6B - INIT_SFC_DRIVER
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 22 - INIT_SECENG
Post 2F - RELOCATE
Post 23 - INIT_SYSRAM
Post 31 - FETCH_HEADER_4BL_CD
Post 3B - PCI_INIT
Post 44 - FETCH_CONTENTS
Post 45 - HMACSHA_COMPUTE
Post 46 - RC4_INITIALIZE
Post 48 - SHA_COMPUTE
Post 4B - LZX_EXPAND
Post 4D - DECODE_FUSES
Post 4E - FETCH_OFFSET_6BL_CF
Post 51 - LOAD_UPDATE_2
Post 52 - BRANCH
Post 59 - INIT_SOC_MMIO
Post 5A - INIT_XEX_TRAINING
Post 5B - INIT_KEYRING
Post 5C - INIT_KEYS
Post 5F
Post 60 - INIT_KERNEL
Post 61 - INIT_HAL_PHASE_0
Post 62 - INIT_PROCESS_OBJECTS
Post 63 - INIT_KERNEL_DEBUGGER
Post 64 - INIT_MEMORY_MANAGER
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS
Post 69 - INIT_KEY_VAULT
Post 6A - INIT_HAL_PHASE_1
Post 6B - INIT_SFC_DRIVER
Post 6C - INIT_SECURITY
Post 6D - INIT_KEY_EX_VAULT
Post 6E - INIT_SETTINGS
Post 6F - INIT_POWER_MODE
Post 70 - INIT_VIDEO_DRIVER
Post 71 - INIT_AUDIO_DRIVER
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init
Post 73 - INIT_SATA_DRIVER
Post 75 - INIT_DUMP_SYSTEM
Post 76 - INIT_SYSTEM_ROOT
Post 77 - INIT_OTHER_DRIVERS
Most Fails(cumulative): 0xA0
ShutdownCode:
Bad Block ID @ 0x1F2 [Offset: 0x806400]
Bad Block ID @ 0x1F2 Found @ 0x3FF[Offset: 0x107BE00]Thanks