TX Product(s) used: DemoN, Proto v2
Console Type:Trinity
NAND size: 16
Dashboard version: 16756 (retail), 16747 (glitch)
CB version: 9188
Description of problem: below
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y
So i am aware how ridiculous this is, and I am not sure why I ever did think it was a good idea, but here goes...
I had dash 16756 on my DemoN Trinity Xbox for my retail dash, and 16747 on my glitch NAND. Problem was that i decided to update my glitch NAND, but realized other tools (ex. dashlaunch) weren't updated for the newest dash yet, so i downgraded back to good old 16747. In all of my wisdom i also decided it would be a great idea to downgrade my stock dash as well, and not back it up!! I believe it was late and I was very tired.... not good planning
My predicament is this; when I try and create a Retail 16756 image to flash to my retail NAND, it writes fine with no errors, but all of a sudden I am getting 0022 red light, though I cannot pinpoint the issue. I am certain it is not wiring or any soldering, as the xbox was not tinkered with beyond software (besides the original chip installs a while back) and it was working before this point. I also created a brand new firmware file with a clean SMC to make sure, yet it still didnt work. I did have a backup from dash 16547 that did not work when flashed, nor when updated and flashed.
So I suppose my main question is, as long as this is enough info to help guide someone, what do I need to do to create an image that I can flash to my retail NAND which will allow the console to boot?
Console Type:Trinity
NAND size: 16
Dashboard version: 16756 (retail), 16747 (glitch)
CB version: 9188
Description of problem: below
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y
So i am aware how ridiculous this is, and I am not sure why I ever did think it was a good idea, but here goes...
I had dash 16756 on my DemoN Trinity Xbox for my retail dash, and 16747 on my glitch NAND. Problem was that i decided to update my glitch NAND, but realized other tools (ex. dashlaunch) weren't updated for the newest dash yet, so i downgraded back to good old 16747. In all of my wisdom i also decided it would be a great idea to downgrade my stock dash as well, and not back it up!! I believe it was late and I was very tired.... not good planning
My predicament is this; when I try and create a Retail 16756 image to flash to my retail NAND, it writes fine with no errors, but all of a sudden I am getting 0022 red light, though I cannot pinpoint the issue. I am certain it is not wiring or any soldering, as the xbox was not tinkered with beyond software (besides the original chip installs a while back) and it was working before this point. I also created a brand new firmware file with a clean SMC to make sure, yet it still didnt work. I did have a backup from dash 16547 that did not work when flashed, nor when updated and flashed.
So I suppose my main question is, as long as this is enough info to help guide someone, what do I need to do to create an image that I can flash to my retail NAND which will allow the console to boot?