TX Product(s) used: J-R Programmer, CR3 Lite, Nand-X
Console Type: Slim Trinity
NAND size: 16M (HY27US08281A)
Dashboard version: ?
CB version: 9231
Screenshot of NAND details from J-Runner:
![]()
PhotoBucket Images: http://i46.photobucket.com/albums/f111/Michael1171
Image of Coolrunner:
Topside overview
Red, green, brown wires 1
Orange wire
Coolrunner view
Images of close-up soldering to motherboard:
Blue and Yellow wires 1 (underside)
Blue and Yellow wires 2 (underside)
Description of problem:
Dumped original nand with out a problem. Wrote ECC file to flash. Programed CR3 with trinity xsvf file with Sw2 on PRG. Console turns on with a flashing green light on the faceplate. CR3 PWR LED is solid red. CR3 DBG never lights up. Reversed all soldering and flashed original nand, console works normally. Tried different S2 dip switch settings.
Was the console working before you started: Yes
Console Type: Slim Trinity
NAND size: 16M (HY27US08281A)
Dashboard version: ?
CB version: 9231
Screenshot of NAND details from J-Runner:
PhotoBucket Images: http://i46.photobucket.com/albums/f111/Michael1171
Image of Coolrunner:
Topside overview
Red, green, brown wires 1
Orange wire
Coolrunner view
Images of close-up soldering to motherboard:
Blue and Yellow wires 1 (underside)
Blue and Yellow wires 2 (underside)
Description of problem:
Dumped original nand with out a problem. Wrote ECC file to flash. Programed CR3 with trinity xsvf file with Sw2 on PRG. Console turns on with a flashing green light on the faceplate. CR3 PWR LED is solid red. CR3 DBG never lights up. Reversed all soldering and flashed original nand, console works normally. Tried different S2 dip switch settings.
Was the console working before you started: Yes