I have a board (phat) that has some broken traces. It appears to have sustained damages where the x-clamps would be removed.
↧
[WANTED] [TN] Trace Repair Needed
↧
hello !
Hello !
I used to hack old Xbox, I will try pretty soon to do it whith a new Xbox360E
very nice forum with a lot of help !
I used to hack old Xbox, I will try pretty soon to do it whith a new Xbox360E
very nice forum with a lot of help !
↧
↧
Zephyr No Green light but sounds like its glitching
TX Product(s) used: CR Rev C
Console Type:Zephyr
NAND size: 16/
Dashboard version: e.g 2.0.13**
CB version: 4578
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
updflash.bin log (if applicable):
Image of Coolrunner:
20140409_180559.jpg
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem: Zephyr wont glitch no green light
Was the console working before you started: Yes
Do you get a green debug light appear on the RGH chip every 4-5 seconds: No
How long is the light on for each time:
(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
Console Type:Zephyr
NAND size: 16/
Dashboard version: e.g 2.0.13**
CB version: 4578
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
Code:
===================================================
09 April 2014 17:08:44
J-Runner v0.3 Beta (4) Started
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00000000
Can not Continue
Can not continue
Checking Console..
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 4578
Zephyr
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 4578
Zephyr
Reading Nand to G:\Alll\RGH\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:41 min:sec
Reading Nand to G:\Alll\RGH\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Zephyr
RGH Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:30 min:sec
Comparing...
Nands are the same
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 1.10
CB_A: 4578
CB_B: missing
CD (image): 8453
CD (decrypted): 8453
* this image will be valid *only* for: zephyr
* patching SMC...
Patching Zephyr version 1.10 SMC at offset 0x1257
* zero-pairing...
* constructing new image...
* encrypting CB...
* encrypting CD...
* base size: 6C000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0xFF1F (0x7F20 bytes) CB_A 4578
0xFF20..0x15F1F (0x6000 bytes) CD 8453
0x15F20..0xBFFFF (0xAA0E0 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into output\image_00000000.ecc
Version: 10
Flash Config: 0x01198010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min:sec
Programming Coolrunner
G:\Alll\RGH\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\common\xsvf\zephyr.xsvf
Version: 03
Flashing G:\Alll\RGH\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\common\xsvf\zephyr.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 28C6
Done!
Programming Coolrunner
G:\Alll\RGH\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\common\xsvf\zephyr.xsvf
Version: 03
Flashing G:\Alll\RGH\J-Runner v02 Beta (288) Core Pack\J-Runner v02 Beta (288) Core Pack\common\xsvf\zephyr.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 28C6
Done!Image of Coolrunner:
20140409_180559.jpg
Images of close-up soldering to motherboard:
(attach images to your post)
Description of problem: Zephyr wont glitch no green light
Was the console working before you started: Yes
Do you get a green debug light appear on the RGH chip every 4-5 seconds: No
How long is the light on for each time:
(be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).
↧
Corona V5 problems
XCGPU C-A02
X818337-004
V9A30BLWN7 D CANADA
Nand type ST TSOP 250GB
Mfr 2013-09-23
Console Type: Corona v5
Dashboard version: 2.0.16747
CB version: 13182
there was no debug light and i i thought it was because of the bridges so i bridged R2C6 & R2C7
due to poor soldering i removed r2c10 by mistake i bridged it also,
jrunner says checking console and then wrong version
restarted the app after sometime now the jprogrammer is no recognized even when its in bootloader
but i have another one at home so i'm going to try with that and keep you posted.
http://speedy.sh/x2TVq/CCC.jpg
http://speedy.sh/zesdF/IMG-2860.JPG
http://speedy.sh/uXJEp/IMG-2848.JPG
http://speedy.sh/Qc2MZ/IMG-2852.JPG
http://speedy.sh/y8eH5/PAAAA-2847.jpg
http://speedy.sh/BqXUx/IMG-2850.JPG
X818337-004
V9A30BLWN7 D CANADA
Nand type ST TSOP 250GB
Mfr 2013-09-23
Console Type: Corona v5
Dashboard version: 2.0.16747
CB version: 13182
there was no debug light and i i thought it was because of the bridges so i bridged R2C6 & R2C7
due to poor soldering i removed r2c10 by mistake i bridged it also,
jrunner says checking console and then wrong version
restarted the app after sometime now the jprogrammer is no recognized even when its in bootloader
but i have another one at home so i'm going to try with that and keep you posted.
http://speedy.sh/x2TVq/CCC.jpg
http://speedy.sh/zesdF/IMG-2860.JPG
http://speedy.sh/uXJEp/IMG-2848.JPG
http://speedy.sh/Qc2MZ/IMG-2852.JPG
http://speedy.sh/y8eH5/PAAAA-2847.jpg
http://speedy.sh/BqXUx/IMG-2850.JPG
↧
[WANTED] UK| Anyone selling a Nand-X Or JR Programmer V2
Hello is anyone selling a nand x that accepts paypal ? I Kinda need it asap!
↧
↧
CR3 Lite questions
Hi, I just purchased a CR3 Lite off a friend and I was wondering do I need the double shield cable? I'll be rgh'ing a jasper 16mb on the dash 16203 so it'll be rgh2.
↧
Hello
Hi, i have read a lot on this forum but forgot to sign up...until now.
↧
R-JTAG Jasper Won't Load Xell (Occasional 0010)
I am having issues on a Jasper booting Xell. I have tried pretty much every combo but I cannot get it to boot. Original Nand boots fine
Console Type: (Jasper)
NAND size: 256
Dashboard version: e.g 2.0.16547
CB version: 6754
Screenshot of NAND details from J-Runner:
![]()
J-Runner log:
I restarted JRUNNER on accident, but I basically got 2 reads, they were compared, I selected JTAG/AUD_CLAMP/RJTAG, built .ecc and wrote it.
POST output from J-Runner :
This the typical 0010 (In this case it was stock Voltage, dips 5,7,8 on, top CPU_RST not R8C2 point)
Image of R-JTAG board & Images of close-up soldering to motherboard:
http://postimg.org/gallery/95gha23u/ac15f55e/
Description of problem:Console will not boot XELL, And sometimes displays 3 red lights with error code 0010
Was the console working before you started: Y
Console Type: (Jasper)
NAND size: 256
Dashboard version: e.g 2.0.16547
CB version: 6754
Screenshot of NAND details from J-Runner:
J-Runner log:
I restarted JRUNNER on accident, but I basically got 2 reads, they were compared, I selected JTAG/AUD_CLAMP/RJTAG, built .ecc and wrote it.
POST output from J-Runner :
This the typical 0010 (In this case it was stock Voltage, dips 5,7,8 on, top CPU_RST not R8C2 point)
Code:
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 08
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 12 - FSB_CONFIG_RX_STATE
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 20 - CB entry point reached
Post 20 - CB entry point reached
Post 60 - INIT_KERNEL
Post 20 - CB entry point reached
ShutdownImage of R-JTAG board & Images of close-up soldering to motherboard:
http://postimg.org/gallery/95gha23u/ac15f55e/
Description of problem:Console will not boot XELL, And sometimes displays 3 red lights with error code 0010
Was the console working before you started: Y
↧
FIXED Jr programmer stuck in bootloader mode
Well....I dumped my nand. Then I installed Sonus and it would not read so I updated jr programmer to 1.04fw and now its stuck in bootloader mode. Switch left or switch right. I am stumped. Is it broken?
i tried resetting it also.
YAY...nevermind.....just in case anyone else runs into this I just updated a last time but this time with the switch set to programmer mode and it fixed it!!!!1
20140409_205950.jpg
i tried resetting it also.
YAY...nevermind.....just in case anyone else runs into this I just updated a last time but this time with the switch set to programmer mode and it fixed it!!!!1
20140409_205950.jpg
↧
↧
Xbox Falcon RGH2.0 Help Needed
I've been extremely over thinking this I guess and I have a lot of research to RGH2.0 a Falcon Motherboard. But anyways I know Falcon RGH2.0 have very slow boot timings and I heard switching the CPU_RST Cable with the Slim Blue wire makes it faster. I tought the Double Shielded cable had to be solder to the av port like the Ground Wire. Do I really need to make a Double shielded cable for an RGH2.0 on a falcon or can I just solder the slim Blue wire to point D on a Xecuter CoolRunner Rev C. Im also curious what is the Double Shielded CPU_RST Cable effect on the motherboard.
↧
CR4 XL IS COMING
XECUTER CR4 XL - THE FINAL SOLUTION.
Completely redesigned method of glitching. Twice as fast as the fastest glitchers available - yes, including Slim proto. Incredibly stable - we glitched the worst boxes we could find in less than 3 cycles (even with Slim Proto or CR3 Pro they wouldn't boot AT ALL). 95% of boxes instaboot.
Less wires, small form factor - currently testing Falcon, Jasper, Trinity & Corona v1 - v6
This is our last 360 product. Many months have gone into perfecting this new method. You bet your ass when we tell you that this is the real deal.
Coming very soon. if you want it sooner - bitch at your favorite retailer for it :)
Completely redesigned method of glitching. Twice as fast as the fastest glitchers available - yes, including Slim proto. Incredibly stable - we glitched the worst boxes we could find in less than 3 cycles (even with Slim Proto or CR3 Pro they wouldn't boot AT ALL). 95% of boxes instaboot.
Less wires, small form factor - currently testing Falcon, Jasper, Trinity & Corona v1 - v6
This is our last 360 product. Many months have gone into perfecting this new method. You bet your ass when we tell you that this is the real deal.
Coming very soon. if you want it sooner - bitch at your favorite retailer for it :)
↧
ANSWERED Sonus not working
I have a trinity gear of war console
I try to get Sonus to work and all I get is:
----------------
status: 0x0
SPI Init Failed !
Sending Flash Init...
----------------
IMG_0415.jpg
Of Course you will want to see my install so here it is
So Far I have updated the firmware of my programmer v1 to 1.4fw
pushed reset like a million times
updated firmware again
Did I miss something :confused:
Any help would be nice
I try to get Sonus to work and all I get is:
----------------
status: 0x0
SPI Init Failed !
Sending Flash Init...
----------------
IMG_0415.jpg
Of Course you will want to see my install so here it is
So Far I have updated the firmware of my programmer v1 to 1.4fw
pushed reset like a million times
updated firmware again
Did I miss something :confused:
Any help would be nice
↧
Hello
Hi everyone.. I'm totally new to xbox community, I bought xbox 360 slim recently and started to know about it, facing some problems regarding installing games on hdd, nevertheless, I'm learning about it and by the help of this forum and you friends I'll reach my goals.
Thanks
Thanks
↧
↧
[WANTED] RGH Console (NC, USA)
I'm looking for an RGH console, preferably something that includes the power brick and controller, but if not that's fine as long as the price on the console is right. I'm in eastern North Carolina but would be willing to pay to have it shipped, though preferably only within the U.S. and Canada. Phat or slim is fine; I don't particularly care which.
↧
Is my consul jtagged or not
Hi there, I have a xbox 360 Slim 4GB, I don't know what kind of modification it has, is it jtag, RGH, or just flashed?, also I have problems with installing games on hdd (320 GB) I added it recently, I copied XEXMENU and loaded skyrim inside it, then copied it to my hdd (320 GB) it works perfectly inside xexmenu, but I can't find it in "My Games" on the dashboard (is it the original dashboard), also the xexmenu (which I can see in "My Games") stopped working unless I put my usb memory stick in the consul which I copied the xexmenu from. Actually I patched the game and xexmenu I don't know what happened, something went wrong. Before I did theses steps I took the consul to a gaming shop, he loaded it with over 25 games on the 320 GB hdd, all of them are working smoothly and I see them in My Games.. why skyrim doesn't show on My Games in the main dashboard? I also noticed that the consul takes long time to stratup each time I start it (I sometimes shut it off and restart it again).. I'v read that such case caused by jtag and it is normal. I have many other questions but I don't want to bother readers about them now, so be patient with my guys, any information and advice will be appreciated and if there is a guide for beginners about such stuffs please direct me to it. I attached photos of the motherboard of my consul in order to show it to you hope to get answer of the jtag stuff. Thanks in advance for your help.
Zeyad
Zeyad
↧
help needed plz
bought a rgh yesterday and i tryied to use nand flasher as i was gonna update the dash bourd but it cant find a nand (nand flasher) can some1 please help me i dont even fink it was done properly from the person who done the rgh
↧
Help rebuilding corrupt Nand (if possible)
Hello. I will try to keep it short, keeping important facts, as I presume wall blocks bore people. :)
TX Product(s) used: TX Nand-X, CoolRunner Rev B
Console Type: Jasper
NAND size: 16GB
Description of problem:
Jasper 16MB Xbox. The original dashboard of the console was 2.0.14699, so it was glitched with success using RGH (1).
Last week, the console was returned to stock dashboard, then updated using Xbox Live to 2.0.16547 (1 update).
Following the update, the nand was written with the dump from 2.0.14699 dashboard (no backup first).
Obviously, not the Xbox dosen't run anymore. The console gives 0022 after 30 seconds.
What I have:
- original dump of retail when it was 14699
- CPU Key
I've tried to make a new nand without nand following Martin's instruction from here, increased LDV with one (from 8 to 9), but I am not really sure if it applies in my case.
My question is that if I can do something about it or dump the motherboard in the history's recycle bin. :)
Thank you.
TX Product(s) used: TX Nand-X, CoolRunner Rev B
Console Type: Jasper
NAND size: 16GB
Description of problem:
Jasper 16MB Xbox. The original dashboard of the console was 2.0.14699, so it was glitched with success using RGH (1).
Last week, the console was returned to stock dashboard, then updated using Xbox Live to 2.0.16547 (1 update).
Following the update, the nand was written with the dump from 2.0.14699 dashboard (no backup first).
Obviously, not the Xbox dosen't run anymore. The console gives 0022 after 30 seconds.
What I have:
- original dump of retail when it was 14699
- CPU Key
I've tried to make a new nand without nand following Martin's instruction from here, increased LDV with one (from 8 to 9), but I am not really sure if it applies in my case.
My question is that if I can do something about it or dump the motherboard in the history's recycle bin. :)
Thank you.
↧
↧
[Wanted] [UK] 360 Slim dual nand
Hi,
I'm after a Xbox 360 Slim with dual NAND.
Ideally with, but not a deal breaker:
250gb internal drive
External drive with content
Not fussed about controllers or boxes etc.. just as long as it has power.
I'm midlands based so can do cash on collection for local-ish or paypal for delivery.
What you got???
Cheers
I'm after a Xbox 360 Slim with dual NAND.
Ideally with, but not a deal breaker:
250gb internal drive
External drive with content
Not fussed about controllers or boxes etc.. just as long as it has power.
I'm midlands based so can do cash on collection for local-ish or paypal for delivery.
What you got???
Cheers
↧
hello everyone
My name is Blazillion , its a pleasure to meet you all :)
↧
rgh xbox 360 arcade/core
Hey everyone, I have an xbox 360 that I am trying to RGH, but I don't have the necessary items to do it. Is there anyway I can send my system to someone along with payment so it can be done? I live in Dallas Texas but it won't be a problem sending the xbox, it's a bit banged up but I know it has the ability to RGH. I'm extremely interested in the modding world as far as 360, so anyone services or offer of help would be greatly appreciated
↧