November 12, 2015, 1:57 pm
Hi all, i had a 250gb slim version like 3 years (or more) turn down, i remember some guy installed a RGH (i guess) chip
Today i turn on again and try to just play a new game, i must update from the disc to run the game so i start to learn how update it , i follow some pretty easy tutorials to update with dashlaunch 3.16 and xenbuild, my dash ver is 14699 and i get this error when i try to update with xebuild update -f 17489 trought
updsvr
Code:
*****ERROR: console hv patches are not recent enough to support update mode! update console patches and reboot before trying again.
Ok, read somewhere that the command "xebuild.exe client -p" should fix the problem, i get a new error:
Code:
connected to Trinity with updsvr version 2 (peek version 0)Updating patches in auto mode: 14699\bin\patches_g2Trinity.bin
***** ERROR: could not load 14699\bin\patches_g2Trinity.bin, aborting
So now, i0m totally lost, i don't know what to do :(
By other hand I tried to make nand dump, and seems there is not cpukey and that... the console has some backup in the hdd and works perfect with XeXMenu 1.1
Code:
xeBuild v1.12.659---------------------------------------------------------------
---- { Client Mode } ----
started, watching network for xbox...success, found xbox beacon at 192.168.1.40
attempting to connect...success!
Getting console info...success!
connected to Trinity with updsvr version 1 (peek version 0)
NAND image size: 0x1080000 Block size: 0x4200 Spare Data: Yes
------ parsing console info response ------
Console Current Info:
running kernel : 2.0.14699.0
bootstrap type : Trinity
hardware type : Trinity
hardware flags : 0x40000227
internal HDD : present
Image Type : Trinity (Glitch2)
1BL key : 00000000000000000000000000000000 (bad)
Virtual Fuses : not present
1BL RSA pub : bad
PIRS RSA pub : bad
MASTER RSA pub : bad
Xell Reason : console eject button
CF LDV : 0
Pairing Value : 0x000000
dumping console flash to \Users\MaTi\Desktop\nanddump.bin
reading flash image from console...received 0x1080000 bytes data OK, writing to file \Users\MaTi\Desktop\nanddump.bin...success!
Completed in 2s
success!
I would appreciate some tips
↧
November 13, 2015, 11:53 am
Console Type: Corona v1,
Programmer Used: JRP v2.0
NAND Size: 16 MB
Dashboard version: e.g 2.0.17489
CB Version: 13181
Screenshot of NAND details from J-Runner:
![]()
J-Runner log:
Code:
===================================================
Thursday, November 12, 2015 11:56:56 PM
J-Runner v0.3 Beta (8) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Reading Nand to C:\Users\Mista Kronic\Desktop\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 3:20 min:sec
Initializing nanddump1.bin..
Reading Nand to C:\Users\Mista Kronic\Desktop\J-Runner\output\nanddump2.bin
Corona
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:21 min:sec
Reading Nand to C:\Users\Mista Kronic\Desktop\J-Runner\output\nanddump3.bin
Comparing...
Nands are the same
Reading Nand
Done!
in 3:20 min:sec
Comparing...
Reading Nand to C:\Users\Mista Kronic\Desktop\J-Runner\output\nanddump4.bin
Nands are the same
Reading Nand
Done!
in 3:20 min:sec
Comparing...
Nands are the same
Glitch2m Selected
Glitch2 Selected
Comparing...
Nands are the same
===================================================
Friday, November 13, 2015 12:58:41 AM
J-Runner v0.3 Beta (8) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Corona
Glitch2 Selected
Nand Initialization Finished
Comparing...
Nands are the same
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Comparing...
Nands are the same
ECC created
CR4 Selected
R-Jtag Selected
R-Jtag de-Selected
CR4 de-Selected
CR4 Selected
===================================================
Friday, November 13, 2015 2:26:56 AM
J-Runner v0.3 Beta (8) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Glitch2 Selected
Glitch2m Selected
Glitch2 Selected
CR4 Selected
===================================================
Friday, November 13, 2015 2:29:25 AM
J-Runner v0.3 Beta (8) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Checking Console..
Version: 10
Flash Config: 0x00043000
00043000
Corona
CB Version: 13181
Corona
Version: 10
Flash Config: 0x00043000
Writing Nand
CORONA_16MB_CR4.ecc
Done!
in 0:18 min:sec
===================================================
Images of close-up soldering to motherboard (attach images to your post):
![]()
![]()
![]()
Detailed Description of the Problem: So I've installed a CR4 XL into a Corona v1 board set to RGH2+. However after the install, the CR4 board does not seem to glitch at all and only shows that it is getting power. The console on the other hand, powers up (no video though) so I presume there is nothing wrong with the motherboard. I've used one of the alt cpu_rst points instead of the recommended one since i don''t have access to good quality thermal paste at the moment. Also, if it helps, I've installed the CR4 after reading the NAND and writing the RGH2+ ECC that came with Jrunner. Please help. TIA
Was the console working before you started: Yes
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: No
↧
↧
November 14, 2015, 5:50 am
Hi,
I am new in this, and i search for solutions how to flash my iHAS124-14 F CL07 for burning XGD3 games for X360.
I appreciate if anyone can help me in this "problem".
Thank you in advance!
↧
November 14, 2015, 10:29 am
Hi, i want to install a demon on my Xbox slim e v5, I got a have a demon phat with corona cnv qsb v1, it fits Well on corona v5 or i need wired install? Thanks guys for the help
↧
November 14, 2015, 11:25 am
Hello
I am having a bit of trouble and hoping someone can help. I used xeBuild to update my console to 17489, and now when I load my Black Ops II or Advanced Warfare back-ups it gives me a "Fatal Error Intercepted" message, then shuts down the console. This only happens when I attempt to play Local Multiplayer on either game. I have attempted some of the fixes I found online, like unloading dash launch, reverting to an older TU, changing settings in Launch.ini, moving launch.ini from the onboardMu to my HDD, turning off the freestyle plugin and FTP plugin but nothing seems to work. Any help would be greatly appreciated. I have attached a link to my launch.ini so if there are any out-of-whack settings I hope somebody is able to see them. I am using Aurora v0.5b. Also, every time I log in a profile it now tells me that it cannot connect to Xbox Live. It hasn't done that in a while (when I had the old dash) and it takes longer to log into a profile. Not sure if that makes a difference.
Thank You
Launch.ini
http://www.datafilehost.com/d/1321050e
↧
↧
November 14, 2015, 1:32 pm
Hey guys, I'm new and I dont know if this is posted in the right section so please move it when it's wrong.
A few years ago i bought a Xbox 360, but i wasn't able to go online with it. So i never used it again. Last week i found the xbox and I wondered its possible to play downloaded games on it. I connected the samsung drive with the pc and opend jungleflasher, the drive is allready flashed but also spoofed as an liteon drive. And always when i try to update the xbox, I receive the error "3151-335A-1600-2203-C001-0001" I think it's because the drive is spoofed.But is there any way to update/play games on the xbox without buying a liteon drive? And when I burn an iso to a dvd and try to play it on the xbox,I also get an error.
Sorry for my bad English, I'm from Germany :)
greetz Dreazz
↧
November 14, 2015, 2:52 pm
Hi, I just recently bought an jtag 2 days ago. Everything was going fine until the middle of today. I updated the dash by flashing the nand with Simple 360 Nand Flasher to dash 16747. Everything went smoothly after that and I went on playing games. Then I left my Xbox on when I went to go grab some lunch, I came back and my Xbox was frozen. I restarted it and got an E 79 Error, so I shut it off and restarted it again. This time I got the 3 led RROD, so again I shut it off. I turn it on again and it boots successfully so I disregard what just happened and continue playing a game. After about 5 minutes it froze again. I turn it back on and i get the first time startup menu where you choose language, locale, ect. I go through that and after a few more minutes it freezes. After I reboot it I get the first time startup menu again, and it continues to either freeze after successfully going through the first time startup and being on the dash for a few minutes, red ring, or E 79 Error after every restart. I have no idea what to do, I just got this thing and I'm somewhat new to the jtag scene. I do have some experience with building computers and such but I doubt that is going to help me much XD. Anyway, any help would be appreciated. Thank you in advance.
↧
November 14, 2015, 5:03 pm
I have Falcon on the latest dash, bloke that I am doing it for isn't bothered if it takes up to 2 mins to boot. I can get xell to boot with in 40 seconds but can't get the dash to boot at all. I think I've tried everything and am about out of ideas, any suggestions. I know someone will say we need pics, I am in bed now so will get some tomorrow if needs be.
I am using a CR3 lite BTW.
↧
November 14, 2015, 9:39 pm
i am installing the cr4 to my xbox 360 slim trinity board and i am stuck and confused i have soldered the 7 wires on the bored and placed the cr4 on the board and then soldered the RED and BLACK wires on to the cr4 but now im puzzled and i dont know what do do from there
↧
↧
November 15, 2015, 4:24 am
Hello folks,
I've an rgh/jtag 360 and was trying to install mgs v I have not enough memory on my xbox hdd, is there a way to install on my external hdd .
↧
November 15, 2015, 4:47 am
Hello from Northern Ireland new to all this as a buddy hooked me up to get my xbox rgh/jtag best move I've made to date
↧
November 15, 2015, 5:39 am
Hi,
I'm looking for a RGH'ed 360 Slim (Dual Nand optional) + Hard Drive derived to London
Thanks.
↧
November 15, 2015, 6:38 am
hi everyone :)
i'm new here and i would like to thank everyone for the excellent work you all did on this forum.
1- i have xbox360 slim corona but i'm not sure of the version
on this post they said it's corona v2 without hdd
http://team-xecuter.com/forums/threa...tion-Solutions
but my console it has 250gb hdd, i'm very confused about this point
2- what do you think about X360 Mega Mod chip because i just purchased one?
click on each picture to enlarge
![]()
![]()
![]()
![]()
![]()
thank you guys :wink:
↧
↧
November 15, 2015, 12:57 pm
Ive been at this one for ages now. Originally on RGH2 with a CR3 lite, it would boot but the times were up to 2 mins. Tried RGH1.2, no boot. At this point I tried R-Jtag with a CR4, no boot, Tried RGH2+, still no boot. I then tried R-jtag again, after hours of trying everything, I got 1 boot, WOW!
Ive tried the the dip setting, all the caps, but nothing really changed. Sometime it was going to look like a boot but didnt quite get there.
Code:
Load Files Initiliazation Finished
Clean SMC detected
Patching Jasper version 2.3 SMC at offset 0x12BA
17489
Started Creation of the 17489 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.16.728
---------------------------------------------------------------
base path changed to D:\Xbox\J-Runner v02 (278) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image
done! fsroot found ok!
******* WARNING: could not patch SMC reset limit!
D:\Xbox\J-Runner v02 (278) Core Pack\5****9****05\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17349.0
Console : Jasper
NAND size : 16MiB
Build : JTAG
Xell : power on console with console eject button
XellAlt : power on console with wired controller (rear usb port)
Serial : 5******94505
ConsoleId : 03022****911
MoboSerial: 706021****979455
Mfg Date : 11/01/2009
CPU Key : F136467A*******B8C21EEE9D49B22DE
1BL Key : DD88AD0C9ED669E*******FB68563EFA
DVD Key : E63B9452B80B9C*******B6C276AD940
CF LDV : 17
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
I usually get this
Code:
Post 01 - .
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 0E - CB_B ENTRY REACHED
Post 0F - GLITCH SUCCESSFUL
Post 10 - ......
Post 11 - .......
Post 12 - ........
Post 01 - .
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 0E - CB_B ENTRY REACHED
Post 0F - GLITCH SUCCESSFUL
Post 10 - ......
Post 11 - .......
Post 12 - ........
I get this, stops glitching but no boot
Code:
Post 01 - .
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 0E - CB_B ENTRY REACHED
Post 0F - GLITCH SUCCESSFUL
Post 10 - ......
Post 11 - .......
Post 12 - ........
Post 13 - .........
Post 15 - CONTINUING
Post 16 - .
Post 17 - ..
Post 18 - ...
Post 19 - ....
Post 1A - .....
Post 1E - .
Post 1F - ..
Post 20 - ...
Post 21 - ....
Post 22 - .
Post 23 - ..
Post 24 - Entrypoint reached
Post 25 - ...
Post 26 - ....
Post 27 - .....
Post 28 - ......
Post 29 - .......
Post 2A - ........
Post 2C - ...........
Post 2D - ............
Post 2E - LOAD XAM
Post 2F - .............
Post 30 - ..............
Post 31 - INIT KERNEL
Post 32
Post 33
Post 34
Post 35
Post 36
Post 37
Post 38
Post 39
Post 3C
Post 41
Post 42
Post 43
Post 44
Post 45
Post 46
Post 47
Post 54
Post 55
Post 59
Post 5A
Post 5B
Post 5C
Post 5D
Post 5E
Post 5F
Post 60
Post 61
Same again, stops glitching but no boot
Code:
Post 01 - .
Post 03 - ...
Post 04 - BOOT SEQUENCE STARTING
Post 05 - ...
Post 06 - ....
Post 07 - .....
Post 08 - ......
Post 09 - .......
Post 0A - ........
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 0E - CB_B ENTRY REACHED
Post 0F - GLITCH SUCCESSFUL
Post 10 - ......
Post 11 - .......
Post 12 - ........
Post 01 - .
Post 0B - .........
Post 0C - ..........
Post 0D - GLITCH CHECK COMMENCE
Post 0E - CB_B ENTRY REACHED
Post 0F - GLITCH SUCCESSFUL
Post 10 - ......
Post 11 - .......
Post 12 - ........
Post 13 - .........
Post 15 - CONTINUING
Post 16 - .
Post 17 - ..
Post 18 - ...
Post 19 - ....
Post 1A - .....
Post 1C - .......
Post 1E - .
Post 1F - ..
Post 20 - ...
Post 21 - ....
Post 22 - .
Post 23 - ..
Post 24 - Entrypoint reached
Post 25 - ...
Post 26 - ....
Post 28 - ......
Post 29 - .......
Post 35
Post 40
Soldering looks shoddy on the pics because Ive removed and refitted so many time, It also doesn't show the wire and diode that go to DB1F1 because I hadn't fitted it when I took the pics. I am now using the screened cable over the top of the fan shroud
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
↧
November 16, 2015, 8:02 am
Console Type: Corona v1
Programmer Used: JRP v2.0
NAND Size: 16MB
Dashboard version: e.g 2.0.17489
CB Version: 13181
Image of the CR4 XL:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Detailed Description of the Problem: Hello again. So after successfully managing to repair the cpu_rst point and installing RGH to the Corona, I got myself a new problem. This time, the console won't start up at all. It makes a single beep whenever I switch on the mains, but pressing the power button does nothing at all. The CR4 chip is getting power though
Before this problem happened, however, the console successfully booted to Xell through which I flashed updflash.bin successfully and booted into Xbox dash. At that time, besides the fan, only the DVD drive and the wireless modules were connected. Once I put the console back together completely and tried to test agian, the console stopped booting permanently :(
I've read that this problem is usually caused by a short in one of the components. In this case, the only thing that comes to my mind are the NAND X cables which I had to solder directly to the NAND points. Before putting the console back together, i desoldered the cables with the motherboard in the metall shell. But I made sure that there were no stray debris or cross connections or accidental groundings at that point.
What could be causing this? Please Help!!!! TIA
Was the console working before you started: Y
↧
November 16, 2015, 6:11 pm
Console Type: TRINITY
Programmer Used: Jr Programmer V2
NAND Size: xbox storage 4gigs
Was the console working before you started: Yes
once i soldered the 7 wires to the front of the motherboard i soldered the black and the red wires to the cr4 but i dont know where the other wires are supposed to go please dont send me a link to a video id rather have a explanation and or a picture thanks
i ALSO have the trinity qsb v3
↧
November 17, 2015, 1:00 am
I have a LiteOn iHAS124-14 FU Rev. F and i use MBIPG101-R10-65 (MediaRange discs).
I use default settings in imgburn write with calculate optimal. In I/O i have ElbyCDIO - Eleborate Bytes Buffer size 512 MB Main 20% Device 40% Average Disk Queue Length 1,0. In advanced settings i use Force Hyper Tuning enabled and smartburn enabled. I use the same settings both for XGD2 or XGD3, but with for XGD3 i disable burn proof. The disc i burn have dirty disk error, i don't know why. Help. I can't clear OCP history even.
↧
↧
November 17, 2015, 7:46 am
Hi
I flashed a few 360s about 10 years ago and I've blew the dust off mine to have a play this week. After the update though I now have E66.
I've done some research and came across the X360 USB in this forum.
1. I have the Sammy 25 drive.
2. I have an old etreme firmware installed.
3. I believe I injected the original key into the drive during flashing.
My question is :
Can I use the x360 to obtain the key (I have no backup)
Do I then re flash with original firmware, update and then reflash with the latest modded firmware?
Sounds simple... I'm guessing it's not :-)
First Post.... #noob
John
↧
November 17, 2015, 1:12 am
Hi
I can't get my Samsung ms28 drive in to vendor mode,
Get
Vendor Intro failed
I would like to try the activate .iso but the link in jungleflasher isnt working anymore.
I read somewhere is to be found with XBIN, got the xbin.exe.zip but it doesnt do anything,.. what is xbin?
Can anyone help me to this ISO?
Help will appreciated
↧
November 17, 2015, 10:40 am
I have a 360 slim 4gb with a Corona board. I already modded and added a 320gb hard drive. If all I want to do is to be able to put and play games, offline, on the internal or external hard drive, what do I need to do. I am donating the Xbox to an afterschool program. I dont want to have to use discs, as they get scratched and end up being no good, especially in an afterschool program setting. I have 2 xbox's I am goint to do this with, so I would like the ability to connect 2 together with a switch and maybe have halo battles, etc, but they will never be online, or have live accounts, they will mostly be for offline, single player games.
What do I need to do. I am very comfortable around electronics, soldering, etc. I have the J-R programmer V-2, new, still in the box. I don't care about custom dashboards, etc, just the easiest way to select a game off of the hard drive and play it.
Thank's in advance.
↧
