Corona V1 Dash:16767 - RGH

March 4, 2015, 12:01 pm

≫ Next: CORONA CR4 Corona v1 Green Light, No Xell

Hey folks,

So today i got a good working xbox 360 slim for 20 bucks i found out it has a Corona V1 mobo.
I got a Coolrunner rev C lying around that i want to use in this xbox 360 S.
Already ordered a Crystal(48000) but do i need something else?
Also got a J-runner Programmer v1.1

This is my first slim rgh, have done only jtag/rgh/rgh2 on phat consoles.

Also were are the diagrams for a Corona v1/Coolrunner rev C?

↧

CORONA CR4 Corona v1 Green Light, No Xell

March 4, 2015, 8:05 pm

≫ Next: Coolrunner RevC Trinity dashboard 2.0.17150.0

≪ Previous: Corona V1 Dash:16767 - RGH

Console Type: Corona v1

Programmer Used: JRP v2.0

NAND Size: 16mb

Dashboard version: 2.0.17150

CB Version: 13180

Screenshot of NAND details from J-Runner: Posted Below

J-Runner log: Below
Image of the CR4 XL: Below

Images of close-up soldering to motherboard: Below
Was the console working before you started: Y

Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y

How long is the light on for each time: 1 Second

Detailed Description of the Problem
ECC was written to the Corona v1, CR4 Glitches with Green light, but no matter how long it is left on to glitch, Xell does not come up.

Screenshot of Nand Detail:

Code:

=================================================== Wednesday, March 4, 2015 5:00:39 PM J-Runner v0.3 Beta (7) Started WARNING! - Your selected working directory already contains files! You can view these files by using 'Show Working Folder' Button Checking Files Finished Checking Files Trinity Manually Selected Version: 10 Flash Config: 0x00043000 00043000 Corona CB Version: 13180 Corona Reading Nand to C:\Users\Josh\Desktop\Modding Everyday CR4 Tutorial\J-Runner v3 (5) Core Pack\output\nanddump1.bin Reading Nand Done! in 3:26 min:sec Reading Nand to C:\Users\Josh\Desktop\Modding Everyday CR4 Tutorial\J-Runner v3 (5) Core Pack\output\nanddump2.bin Initializing nanddump1.bin.. Corona Glitch2 Selected Nand Initialization Finished Reading Nand Done! in 3:26 min:sec Comparing... Nands are the same CR4 Selected * unpacking flash image, .... Spare Data found, will remove. Removed * found decrypted CD * found XeLL binary, must be linked to 0x1c000000 * we found the following parts: SMC: 2.5 CB_A: 13180 CB_B: 13180 CD (image): 13180 CD (decrypted): 9452 * checking required versions... ok * patching SMC... Patching Corona version 2.5 SMC at offset 0x13B4 * Replacing CD... * XOR HACK NEEDED FOR CB 13180 * patching CB_B... patchset for 13121 found, 5 patch(es) * Applying XOR Hack to CB_B 13180 *** Re-encrypting CB_B with xor keystream *** Fixing entrypoint * Replacing CB_A 13180 with 13121 * encrypting CB... * constructing new image... * base size: 70000 * No separate recovery Xell available! * Flash Layout: 0x0..0x1FF (0x200 bytes) Header 0x200..0x7FF (0x600 bytes) Padding 0x800..0x3FFF (0x3800 bytes) SMC 0x4000..0x7FFF (0x4000 bytes) Keyvault 0x8000..0x9AEF (0x1AF0 bytes) CB_A 13121 0x9AF0..0x118DF (0x7DF0 bytes) CB_B 13121 0x118E0..0x178DF (0x6000 bytes) CD 9452 0x178E0..0xBFFFF (0xA8720 bytes) Padding 0xC0000..0xFFFFF (0x40000 bytes) Xell (backup) 0x100000..0x13FFFF (0x40000 bytes) Xell (main) * Encoding ECC...Done! ------------- Written into output\image_00000000.ecc Version: 10 Flash Config: 0x00043000 Writing Nand image_00000000.ecc Done! in 0:19 min:sec Corona Manually Selected Version: 10 Flash Config: 0x00043000 Writing Nand CORONA_16MB_CR4.ecc Done! in 0:18 min:sec Corona Manually Selected Version: 10 Flash Config: 0x00043000 Writing Nand CORONA_16MB_CR4.ecc Done! in 0:18 min:sec * unpacking flash image, .... Spare Data found, will remove. Removed * found decrypted CD * found XeLL binary, must be linked to 0x1c000000 * we found the following parts: SMC: 2.5 CB_A: 13180 CB_B: 13180 CD (image): 13180 CD (decrypted): 9452 * checking required versions... ok * patching SMC... Patching Corona version 2.5 SMC at offset 0x13B4 * Replacing CD... * XOR HACK NEEDED FOR CB 13180 * patching CB_B... patchset for 13121 found, 5 patch(es) * Applying XOR Hack to CB_B 13180 *** Re-encrypting CB_B with xor keystream *** Fixing entrypoint * Replacing CB_A 13180 with 13121 * encrypting CB... * constructing new image... * base size: 70000 * No separate recovery Xell available! * Flash Layout: 0x0..0x1FF (0x200 bytes) Header 0x200..0x7FF (0x600 bytes) Padding 0x800..0x3FFF (0x3800 bytes) SMC 0x4000..0x7FFF (0x4000 bytes) Keyvault 0x8000..0x9AEF (0x1AF0 bytes) CB_A 13121 0x9AF0..0x118DF (0x7DF0 bytes) CB_B 13121 0x118E0..0x178DF (0x6000 bytes) CD 9452 0x178E0..0xBFFFF (0xA8720 bytes) Padding 0xC0000..0xFFFFF (0x40000 bytes) Xell (backup) 0x100000..0x13FFFF (0x40000 bytes) Xell (main) * Encoding ECC...Done! ------------- Written into output\image_00000000.ecc Version: 10 Flash Config: 0x00043000 Writing Nand image_00000000.ecc Done! in 0:18 min:sec Corona Manually Selected Version: 10 Flash Config: 0x00043000 Writing Nand CORONA_16MB_CR4.ecc Done! in 0:18 min:sec Corona Manually Selected Version: 10 Flash Config: 0x00043000 Writing Nand CORONA_16MB.ecc Done! in 0:18 min:sec

Pictures of CR4:

Picture of CR4:

↧

Coolrunner RevC Trinity dashboard 2.0.17150.0

March 4, 2015, 8:24 pm

≫ Next: RGH Dashlaunch

≪ Previous: CORONA CR4 Corona v1 Green Light, No Xell

I have been out of the modding scene for a bit. Just placing order for some CR4 XL's and other necessary bits. I still have quite a few CR RevC's around.
I am having trouble understanding for older Slims. In this case a Trinity.
On current dashboard 2.0.17150.0! Can they still be glitched with a regular CR RevC? When I look at the chart on "Road Map for Noobs it appears that way but, again, I am not certain.

VrT

↧

RGH Dashlaunch

March 4, 2015, 11:49 pm

≫ Next: GENERAL Can you reuse 16D5S original PCB in another consoole?

≪ Previous: Coolrunner RevC Trinity dashboard 2.0.17150.0

I RGH'ed my 4gb trinity today

And my setup is very unusual. Long story short, my flash: (using xexmenu on a disc) only shows a few files such as launch.xex and ihelper.xex and I am trying to paste in my XBL stealth files and my launch.ini but it won't let me paste, any ideas? Using a formatted 1tb usb for my games.

↧

GENERAL Can you reuse 16D5S original PCB in another consoole?

March 5, 2015, 3:07 am

≫ Next: CORONA Slim E Skhynix cant read nand.

≪ Previous: RGH Dashlaunch

Hi, I have a situation where a console with dead CPU was fixed by replacing with another CPU. I have nand and dvd drive from the old CPU and tried to encode nand with the new CPU key, console works, but I can't seem to get the drive working. I tried nofcrt option in JR, even tried with another PCB and the nand that matches, nothing.
I know I can get it working with TX PCB, but I don't require iXtreme for this console and I have several original drive PCBs just waiting to be used.

↧

CORONA Slim E Skhynix cant read nand.

March 5, 2015, 6:34 am

≫ Next: [WANTED] soldering service

≪ Previous: GENERAL Can you reuse 16D5S original PCB in another consoole?

Console Type:Corona: v4, v6
Programmer Used: NAND-X, JRP v1.1, JRP v2.0
NAND Size: ?? Slim E 250 GB
Dashboard version: 2.0.17150
CB Version: ???
Screenshot of NAND details from J-Runner: Cant Read Nand
J-Runner log
updflash.bin log (if applicable)
Image of the CR4 XL
Images of close-up soldering to motherboard (attach images to your post)
Detailed Description of the Problem: When connecting it to SD reader (tried several diffrent ones, Kingston SD adapter, Sandisk SD adapter, No Name SD adapter, Logik SD to USB, Kong Cardreader USB.
Was the console working before you started: Y and it still does boot with retail nand.
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Not installed
How long is the light on for each time (be aware that if you're trying to work on a faulty console, this is not a T-X product issue!!).

So the problem is, I cant read NAND, Ive installed the Corona 4GB V4 QSB reader.
Ive checked the soldering it´s all ok.
When hooked up to J-Runner I hit Read, then I choose Corona 4GB.
I see only Physical Drive1 and sometimes even PhysicalDrive2 when using diffrent SD to USB readers.
I cant get my Corona board to show up to read it.
I have bridged R2C7. R2C6 and R2C4 the R2C10 does already have a resistor.
Please help if anyone can.

Attached Images

↧

[WANTED] soldering service

March 5, 2015, 8:14 am

≫ Next: Is anyone able to use cheap dvd's with Sony Optiarc CB Plus?

≪ Previous: CORONA Slim E Skhynix cant read nand.

I have a cecha01 ps3 that the previous owner messed up the zif connector for the dvd drive ribbon cable. I have the replacement connectors but I need someone to remove the old connector and solder on a new one. I am located in the usa also.

↧

Is anyone able to use cheap dvd's with Sony Optiarc CB Plus?

March 5, 2015, 8:24 am

≫ Next: [USA] REQ: Original JTAG Installs w/ TX V3 QSB"s

≪ Previous: [WANTED] soldering service

Hi, up until recently i have been using Verbatim 2.4x discs for my backups( with close to a 99% success rate) but it seems as if they have stopped selling them. I tried the Verbatim 8x (mkm-003) discs and after several good burns i start to get failures at either somewhere around 80-90% or at finalize. I figured i would try the gold Windata discs that i see others using and i can't get one game to burn past 50%. Has anyone been able to use the cheaper discs with the Sony Optiarc burner and if so what settings should i change in Imgburn? I went ahead and ordered another burner just in case mine is going bad but now i'm wondering if i should have ordered an ihas instead. Thanks in advance for any suggestions and have a great day..

↧

[USA] REQ: Original JTAG Installs w/ TX V3 QSB"s

March 5, 2015, 5:06 pm

≫ Next: R-JTAG Need help with xenon 17150

≪ Previous: Is anyone able to use cheap dvd's with Sony Optiarc CB Plus?

Hello TX Installers!

Just got my hands on two pre-nxe 360's...one Xenon (x-clamps intact) in need of some true jtag luvin'...already have TX jtag Kit #8 2 go w/ it and TX E79 Kit in case it's uncooperative...just need TX qsb v3 2 add 2 it 4 NAND access.

Also have a pre-nxe Falcon v1 (x-clamps intact) w/ r-jtag qsb v3 that needs a TX qsb v3 2 go w/ it 4 easy NAND R/W as well.

Let me know what u want 4 the install and qsb's.

Best offer gets my money.

Thanks:)

↧

R-JTAG Need help with xenon 17150

March 5, 2015, 10:14 pm

≫ Next: Winchester RGH

≪ Previous: [USA] REQ: Original JTAG Installs w/ TX V3 QSB"s

Hi all, I am looking for some advice. I am very new to modding consoles. I have a phat 360 no hdmi Xenon dash v. 2.0.17150.0. Is this exploitable? If not, are there any chances that it might become exploitable in future? I have flashed my drive to run back up dvds, but I would like to have more customization and use homebrewed apps. Any help, advice, suggestion will be appreciated.

Thanks. :)

↧

Winchester RGH

March 5, 2015, 11:23 pm

≫ Next: destiny rgh

≪ Previous: R-JTAG Need help with xenon 17150

I've bumped into this video :

https://www.youtube.com/watch?v=XFJ_wVA9Muo

Is it fake ?

↧

destiny rgh

March 6, 2015, 6:29 am

≫ Next: RGH Autoupdserv work on WINDBOND 2K?

≪ Previous: Winchester RGH

Does eny one no how to play desteny on rgh xbox as it saying need to be on live yes I got real game not a copy and got fsd on rgh thanks .

↧

RGH Autoupdserv work on WINDBOND 2K?

March 6, 2015, 7:02 am

≫ Next: JTAG Where is the Kiosk point on a Falcon ?

≪ Previous: destiny rgh

If i want to update dashboard on xbox with windbond 2k ram, via Jrunner updserv option, it's working correctly or i need create manualy windbond 2k freeboot and update dash with old method?
If i select WB or WB4G option in xebuild patches tab, than jrunner create windbond freeboot and update dashboard via updserv or not?

↧

JTAG Where is the Kiosk point on a Falcon ?

March 6, 2015, 1:33 pm

≫ Next: Does A GameSave Tell You Game Version?

≪ Previous: RGH Autoupdserv work on WINDBOND 2K?

This is my 1st no QSB install and I can't find any pictures of where the Kiosk point is on this Falcon motherboard, trying to run the rater to do some finer tuning. I found plenty of no qsb install pics, but no one points out where the kiosk is.

↧

Does A GameSave Tell You Game Version?

March 6, 2015, 7:40 pm

≫ Next: Corona v2 nand dump problem

≪ Previous: JTAG Where is the Kiosk point on a Falcon ?

I had put in a ridiculous amount of time playing Skyrim...probably close to 200 hours. Well my XBOX decided to up and die on me, and it was a Jasper. I have now extracted the game save and want to play it on my RGH, *BUT* the game save tells me "The save game was created on a later version of Skyrim. Please download any updates."

Is there a way to tell which version I was running when I created the save game, so I know which update patch to get?

↧

Corona v2 nand dump problem

March 6, 2015, 10:29 pm

≫ Next: JASPER R-JTAG+ BB Jasper Strange Problem

≪ Previous: Does A GameSave Tell You Game Version?

TX Product(s) used: Corona 4GB W/R

Console Type: Corona 4GB v2

Description of problem:

Having trouble reading the nand. Connected my nand reader and soldered on multiple times. Ive checked and re-checked my points many times to make sure I have a good connection. Once connected with J-runner on all I get is 'Failed to get Diskometry'. Ive used the nand reader just the other day to dump another corona; went fine. Ive tried different SD-cards and the USB card reader as well as four different laptops and PC's running different OS.

I removed everything the other day and tested it. It red dotted on me the first time but once I cleaned up the points and removed the solder it booted fine.

Its a real pain getting this thing to dump. Could someone help me out ? and if anyone has a link to the nand point readings so I can test them on my mulitmeter

↧

JASPER R-JTAG+ BB Jasper Strange Problem

March 7, 2015, 5:21 am

≫ Next: JASPER Magic SMC Files R-JTAG+ , Error in JRunner?

≪ Previous: Corona v2 nand dump problem

Hi Team-Xecuter,

Here is my first CR4 R-JTAG+ Jasper 512mb install. But it doesn't work. Before the CR4 I had a CoolRunner Rev C installed but it was to slow for me so I decided to upgrade to the CR4. I chose for the R-JTAG+ method. I installed the NAND-X wires and in JRunner I created an XeBuild image and selected: JTAG>RJTAG>Aud_Clamp?. Then I wrote the image to my Jasper and installed the CR4. Now here comes the problem. The first time I plugged in the PSU the Xbox turned on by itself without me pressing the power button. I directly unplugged the PSU and looked for solder splashes but I couldn't find any. So I plugged in the PSU and it didn't turn on by itself so I pressed the power button and the ring of light wouldn't turn on but before (when it turned on by itself) it did, so now with no ring of light the fans still spinned up and the debug led on the CR4 turned on and stayed on. A few seconds later you could hear the fans glitching rapidly and the debug LED also flashed rapidly.

Template:

Console Type: Jasper
Programmer Used: NAND-X & JRP v2
NAND Size: 512
Dashboard version: 2.0.17150
CB Version: 6754
Screenshot of NAND details from J-Runner: (attach an image to your post)
J-Runner log
updflash.bin log (if applicable)
Image of the CR4 XL
Images of close-up soldering to motherboard (attach images to your post)
Detailed Description of the Problem: See above
Was the console working before you started: Y
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: NO
How long is the light on for each time: n.a

Images: http://m.imgur.com/a/jNbFh

I changed the STBY_CLK (point B on the CoolRunner) to the alternative point. I hoped it would help but it didn't do anything...

I hope this is enough information, I will be including a video in a few minutes.
Video: http://youtu.be/1nagsAYCn5E

Thank You! Any help is greatly appreciated!

↧

JASPER Magic SMC Files R-JTAG+ , Error in JRunner?

March 7, 2015, 11:00 am

≫ Next: Random E79

≪ Previous: JASPER R-JTAG+ BB Jasper Strange Problem

Hi Team-Xecuter,

My BB Jasper keeps freezing when it boots dash. This post was supposed to help me but I couldn't get it to work. This is what I did:

1. Launched JRunner
2. Loaded NandDump1.bin (My original full dump)
3. I selected JTAG and ticked Aud_Clamp? & R-Jtag
4. I downloaded the Jasper magic SMC files for R-JTAG+
5. I have put the smc_jasper_norst.bin here C:\Users\Calvin\Desktop\#JTAG\General\JRunner\J-Runner v3 (5) Core Pack\xeBuild\data
6. I deleted the SMC.bin that was here C:\Users\Calvin\Desktop\#JTAG\General\JRunner\J-Runner v3 (5) Core Pack\xeBuild\data
7. I renamed smc_jasper_norst.bin to SMC.bin
8. I pressed Create XeBuild image
9. JRunner gives me an error
10. Here is the log

Template

Console Type: Jasper
Programmer Used: NAND-X
NAND Size: 512
Dashboard version: 17150
CB Version: 6723
Screenshot of NAND details from J-Runner: IMG
J-Runner log: LOG
Image of the CR4 XL: n.a
Images of close-up soldering to motherboard: n.a
Detailed Description of the Problem: see the above
Was the console working before you started: Y
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y
How long is the light on for each time: 6 Seconds

What am I doing wrong? Any help is appreciated!

Thanks

↧

Random E79

March 7, 2015, 3:31 pm

≫ Next: Corona V4 Homemade Nand Reader

≪ Previous: JASPER Magic SMC Files R-JTAG+ , Error in JRunner?

E79 (1033) on Xenon
I was using the diode method and everything was working just fine. Then when I moved it to another room, a E79 came up. Tried with and without Hard Drive, even with a different Hard Drive, Checked points J2D2.1 & J2D2.2 and both showed the same on the Multimeter (Shows 1.7K on both, but could be a little off, as its an old Multimeter. At least its showing theres a resistance.) Changed to Transistor Method and still the same error. (Going to keep it Transistor method since its suppose to be more reliable). Changed to Stock nand and it boots just fine. Recreated a new Jtagged Nand and got E79 again. Any Idea? Thanks! (Will clean up/shorten wires & add Heat Shrink to the J1F1 Points when fixed. Didn't had Heat Shrink so you could see the solder making contact. This is the 7th console I have Jtagged)
Name: 20150307_180714.jpg
Views: 51
Size: 484.4 KB

Name: 20150307_180714.jpg
Views: 51
Size: 484.4 KB

Name: 20150307_180727.jpg
Views: 56
Size: 510.2 KB

Name: 20150307_180840.jpg
Views: 57
Size: 305.7 KB

Attached Images

↧

Corona V4 Homemade Nand Reader

March 7, 2015, 6:42 pm

≫ Next: RGH RGH2 Jasper (Pain in my ass)

≪ Previous: Random E79

Hi,

Before the TX Nand R/W kit was released, I used a homemade NAND reader to do dumps and I have not needed to use it since then. My question is can I still use the same NAND Reader as I remember there was a maximum dashboard limit, I think it was 14719. The dash of the xbox I have now is 16547. Thanks.

↧