If anyone can help me out id appericiate it..thanks
↧
[USA] Looking for a cr4 or two
↧
JTAG jtag xelReloaded ok but no xeBuild
hi all,startid on 1st jtag yest,am experienced pc and console repairs but this is all new and challenging,
dumped ok, reloaded,got cpu key, loaded nanddump.bin created xeBuild writeNand,no errors but only boots to xellReloaded,
have spent ages going thru forums,any ideas please...does xelReloaded have a dash or do you install it,what differece between
booting by reject and main ledButton
after thinking i done something wrong,i loaded nanddump.bin and wrote it back,no errors and back to origonal xbox dash 6717
thanks....jk
==========================================
11 March 2015 09:06:47
J-Runner v0.3 Beta (7) Started
Checking Files
Finished Checking Files
Downloading SystemUpdate_17150_USB.zip
Done
Creating Directory C:\Users\User\Desktop\j Runner\J-Runner v3 (5) Core Pack\xeBuild\16767\bin
Downloaded *xeBuild/common/ximedic.xex
Finished Checking Files
Jtag Selected
Xenon Manually Selected
Version: 03
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 1903
Xenon
Reading Nand to C:\Users\User\Desktop\xbox\output\nanddump1.bin
Reading Nand
Done!
in 2:14 min:sec
Initializing nanddump1.bin..
Reading Nand to C:\Users\User\Desktop\xbox\output\nanddump2.bin
Xenon
Reading Nand
Nand Initialization Finished
Done!
in 2:15 min:sec
Comparing...
Nands are the same
Load Files Initiliazation Finished
Clean SMC detected
16767
Started Creation of the 16767 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to C:\Users\User\Desktop\j Runner\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image
---------------------------------------------------------------
C:\Users\User\Desktop\xbox\504838764305\updflash.b in image built, info:
---------------------------------------------------------------
Kernel : 2.0.16767.0
Console : Xenon
NAND size : 16MiB
Build : JTAG
Xell : power on console with console eject button
Serial : 504838764305
ConsoleId : 027061590190
MoboSerial: 7768173204176425
Mfg Date : 10/23/2006
CPU Key : 2FEE91CA5582DB0334BEEA845C5A137C
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 20F3E3A6A5DDDD87617EA6566153332F
CF LDV : 4
KV type : type1 (no hash)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\User\Desktop\xbox\504838764305
Image is Ready
Initializing updflash.bin..
Xenon
Nand Initialization Finished
Version: 03
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 2:08 min:sec
dumped ok, reloaded,got cpu key, loaded nanddump.bin created xeBuild writeNand,no errors but only boots to xellReloaded,
have spent ages going thru forums,any ideas please...does xelReloaded have a dash or do you install it,what differece between
booting by reject and main ledButton
after thinking i done something wrong,i loaded nanddump.bin and wrote it back,no errors and back to origonal xbox dash 6717
thanks....jk
==========================================
11 March 2015 09:06:47
J-Runner v0.3 Beta (7) Started
Checking Files
Finished Checking Files
Downloading SystemUpdate_17150_USB.zip
Done
Creating Directory C:\Users\User\Desktop\j Runner\J-Runner v3 (5) Core Pack\xeBuild\16767\bin
Downloaded *xeBuild/common/ximedic.xex
Finished Checking Files
Jtag Selected
Xenon Manually Selected
Version: 03
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 1903
Xenon
Reading Nand to C:\Users\User\Desktop\xbox\output\nanddump1.bin
Reading Nand
Done!
in 2:14 min:sec
Initializing nanddump1.bin..
Reading Nand to C:\Users\User\Desktop\xbox\output\nanddump2.bin
Xenon
Reading Nand
Nand Initialization Finished
Done!
in 2:15 min:sec
Comparing...
Nands are the same
Load Files Initiliazation Finished
Clean SMC detected
16767
Started Creation of the 16767 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to C:\Users\User\Desktop\j Runner\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building jtag image
---------------------------------------------------------------
C:\Users\User\Desktop\xbox\504838764305\updflash.b in image built, info:
---------------------------------------------------------------
Kernel : 2.0.16767.0
Console : Xenon
NAND size : 16MiB
Build : JTAG
Xell : power on console with console eject button
Serial : 504838764305
ConsoleId : 027061590190
MoboSerial: 7768173204176425
Mfg Date : 10/23/2006
CPU Key : 2FEE91CA5582DB0334BEEA845C5A137C
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 20F3E3A6A5DDDD87617EA6566153332F
CF LDV : 4
KV type : type1 (no hash)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\User\Desktop\xbox\504838764305
Image is Ready
Initializing updflash.bin..
Xenon
Nand Initialization Finished
Version: 03
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 2:08 min:sec
↧
↧
Jasper not glitching in to Xell , need some help
hi TX members , this is my second attempt at modding a 360 the first one came out great thanks to members here.
with this Jasper 360 i cant boot into XELL and get the CPU Key , interestingly with the green pulses from the CR4 i get 1 pulse then about 5 seconds later i get 2 then 5 seconds later 1 then 5 seconds after that 3 pulses sort of behaviour.
i also made a mistake when i first fired on the 360 to boot into XELL , i forgot to bridge 1 and 3 on the QSB but that has been fixed although i still cant get into XELL.
Was the console working before you started: Yes
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: yes
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
with this Jasper 360 i cant boot into XELL and get the CPU Key , interestingly with the green pulses from the CR4 i get 1 pulse then about 5 seconds later i get 2 then 5 seconds later 1 then 5 seconds after that 3 pulses sort of behaviour.
i also made a mistake when i first fired on the 360 to boot into XELL , i forgot to bridge 1 and 3 on the QSB but that has been fixed although i still cant get into XELL.
- Console Type: Jasper
- Programmer Used: JRP v2.0
- NAND Size: 16MB
- Dashboard version: 16747
- CB Version: 6754
Was the console working before you started: Yes
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: yes
Code:
Wednesday, March 11, 2015 6:59:48 AM
J-Runner v0.3 Beta (7) Started
Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
R-Jtag de-Selected
Aud_Clamp de-Selected
Retail Selected
Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 6754
Jasper 16MB
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 6754
Jasper 16MB
Reading Nand to C:\downloads\output\nanddump1.bin
Reading Nand
Done!
in 3:25 min:sec
Reading Nand to C:\downloads\output\nanddump2.bin
Initializing nanddump1.bin..
Jasper 16MB
Jtag Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:25 min:sec
Comparing...
Nands are the same
===================================================
Wednesday, March 11, 2015 7:26:07 AM
J-Runner v0.3 Beta (7) Started
Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 6754
Jasper 16MB
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 6754
Jasper 16MB
Reading Nand to C:\downloads\output\nanddump1.bin
Reading Nand
Done!
in 3:25 min:sec
Reading Nand to C:\downloads\output\nanddump2.bin
Initializing nanddump1.bin..
Jasper 16MB
Nand Initialization Finished
Reading Nand
Done!
in 3:25 min:sec
Comparing...
Nands are the same
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_aud_clamp.bin
Version: 10
Flash Config: 0x00023010
Writing Nand
jasper_hack_aud_clamp.bin
Done!
in 0:17 min:sec
↧
FALCON RGH2 Flacon freezes
Whenever i load up a game on my RGH2 Falcon it will play for a few min then freeze, And if i try to use a RPC mod tool it freezes instantly. Could anyone please help me? It boots anywhere from 1 debug to three.
↧
JTAG usb ports not working after jtag
well i can necessarily say after jtag. i'm not sur they were working before. but here is what happen. i didn't have a powerbrick for xenon, so i broke out the center piece in the power port and used a falcon powerbrick instead. every thing works except the usb ports. could i have triggered the failsafe for too much voltage which kills power to the usb ports to avoid damaging external components? could the jtag be drawing too much power away from the ports? any ideas?
↧
↧
Corona CR4 V2 4GB nand reader jrunner error
- Console Type: Corona v2
- Programmer Used: Team Xecuter Corona 4GB nand r/w kit
- NAND Size: 4GB
- Dashboard version: didnt check before but its over 16537
- CB Version: didnt check
- J-Runner log
================================================== =
Thursday, March 12, 2015 5:11:36 PM
J-Runner v0.3 Beta (5) Started
Version v0.3 Beta (7) is available for download.
Checking Files
Downloaded *xeBuild/options.ini
Downloading...
Downloaded *xeBuild/readme.txt
Downloading...
================================================== =
Thursday, March 12, 2015 5:11:56 PM
J-Runner v0.3 Beta (7) Started
Checking Files
Downloaded *xeBuild/launch.xex
Downloaded *xeBuild/lhelper.xex
Downloaded *xeBuild/xeBuild.exe
Finished Checking Files
Initializing updflash.bin..
Corona 4GB
Glitch2 Selected
Nand Initialization Finished
Must be a removable type
Writing to C:\ from G:\Users\Braden\Desktop\updflash.bin
Data error (cyclic redundancy check).
Writing to C:\ from G:\Users\Braden\Desktop\updflash.bin
Data error (cyclic redundancy check).
Writing to C:\ from G:\Users\Braden\Desktop\updflash.bin
The process cannot access the file 'G:\Users\Braden\Desktop\updflash.bin' because it is being used by another process.
Initializing updflash.bin..
System.NullReferenceException
Corona 4GB Manually Selected
Writing to C:\ from G:\Users\Braden\Desktop\updflash.bin
The process cannot access the file 'G:\Users\Braden\Desktop\updflash.bin' because it is being used by another process.
Writing to C:\ from G:\Users\Braden\Desktop\updflash.bin
The process cannot access the file 'G:\Users\Braden\Desktop\updflash.bin' because it is being used by another process.
- updflash.bin log (if applicable)
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to D:\Downloads\J-Runner\xeBuild
---- { Image Build Mode } ----
building glitch2 image
---------------------------------------------------------------
D:\Xbox Nand\J-Runner\092993314209\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.16537.0
Console : Corona
NAND size : 48MiB MMC (system only)
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 092993314209
ConsoleId : 199687536554
MoboSerial: 9910063200401419
Mfg Date : 10/12/2011
CPU Key : D294DDFE31636C08C754E51F12563641
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 5B4B2493F7B7DC36C52E5102F8C4DC4E
CF LDV : 9
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to D:\Xbox Nand\J-Runner\092993314209
Image is Ready
Initializing updflash.bin..
Corona 4GB
Nand Initialization Finished
- Image of the CR4 XL
- Images of close-up soldering to motherboard (attach images to your post)
- Detailed Description of the Problem
so i have read the nand twice and wrote the ecc file to the xbox fine and booted into xell and got the cpu key but im having trouble writing the xebuild file to the xbox as you can see in the errors and im not sure why. i have tried different card reader adapters but the only one that comes up in jrunner is the one that the kit came with it. i have restarted the computer a couple of times and i have unplugged and plugged in the psu a few times and still the same error. first it says "data error (cyclic redundancy check)" then when i try again it says the file is being used... the reason i have some different color wires for the cr4 is because i had trimmed the wires at first but then had to move to the cr4 for the nand reader qsb so i had to use some other ones and no im not using the yellow wire that came with the cr4 as power it is just another yellow wire i had but a bigger gauge so should still be fine. reason i posted here is because i couldnt see a specific forum for the qsb nand r/w kit so i posted here as i am using a cr4
- Was the console working before you started: Y
- Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y
Any help would be appreciated
↧
R-JTAG Xecuter Non-Xenon JTAG Alt Kit (Kit #5) needed??
Hi,
Quick question,
Is the Xecuter Non-Xenon JTAG Alt Kit (Kit #5) needed to complete the R-Jtag installation?
I have one missing from a kit I purchased
Any help would be great
Quick question,
Is the Xecuter Non-Xenon JTAG Alt Kit (Kit #5) needed to complete the R-Jtag installation?
I have one missing from a kit I purchased
Any help would be great
↧
JTAG jtag, fsd ok on usb but not hd
hi all ..jtag, fsd ok on usb , it does say crash but can click to run fsd
i have copied fsd to hd and can run from hd but not on reboot,
if no usb stick it will stay in xbox system,
what/where is the boot priority ,usb or hd, no ini file
i have formatted hd with fat32 and tried hd that had been formatted from xbox.
.
thanks for help,great site, jk
i have copied fsd to hd and can run from hd but not on reboot,
if no usb stick it will stay in xbox system,
what/where is the boot priority ,usb or hd, no ini file
i have formatted hd with fat32 and tried hd that had been formatted from xbox.
.
thanks for help,great site, jk
↧
[USA] CR4 or R-JTAG
Hello all,
I'm looking for either a CR4 or R-JTAG kit. Been trying to find a few for a while, but no luck. Someone here must have a truck load of them that they are holding on to! Someone sell an unlucky guy one or two of them ;)
I'm looking for either a CR4 or R-JTAG kit. Been trying to find a few for a while, but no luck. Someone here must have a truck load of them that they are holding on to! Someone sell an unlucky guy one or two of them ;)
↧
↧
Rebuilding Black Ops ISO and/or god file
I have been trying to rebuild my blacks ops god file or ISO my disc plays but has been scratched up enough that it doesn't load all the maps. I have done a lot of reading on this and all the methods failed abgx which wont do cause i want to play online. Would appreciate any assistance anyone has to offer on this. I have the god file from my old console and and i have the game ripped to my jtag as well. Would prefer to get the iso so i have it backed up but the god file would work fine to. Thanks
↧
Cr4 xL Corona v6 4g cant power on and boot to xell
Hello,
I have a problem to boot in the xell . I was able to read nand and write ecc file ,but after i can t power on console.
It is my first chip ,so maybe i sommething doing wrong. Could you please some one help thanks
Here are some pictures:
![Name: 20150314_120611[1].jpg
Views: 68
Size: 1.77 MB]()
![Name: 20150314_120534[1].jpg
Views: 62
Size: 1.84 MB]()
![Name: 20150314_094241[1].jpg
Views: 63
Size: 1.64 MB]()
![Name: 20150314_094210[1].jpg
Views: 59
Size: 1.65 MB]()
Best regard
Vladimir
I have a problem to boot in the xell . I was able to read nand and write ecc file ,but after i can t power on console.
It is my first chip ,so maybe i sommething doing wrong. Could you please some one help thanks
Here are some pictures:
Best regard
Vladimir
↧
Best Current JTAG / RGH Solution
Hey Guys -
I've had a modded XBox 360 for years now having first used a modchip followed by drive flashing, and now an **** with remote. I'm wanting to play a bit more again so have two questions I wanted to post, please...
Question #1 - What's Currently the best JTAG / RGH Solution?
I currently own a Phat Falcon XBox (power ratings) with a Lite-On Drive and the latest Dashboard for which I use an **** that's easily removable. The Lite-On drive is also flashed as it's what I used prior to the ****. On the site where I purchase most of my console equipment, they sell 88 items for JTAG / RGH. I know this is the CR4 XL forum, but is it still the best option (Xecuter or non-Xecuter?)
Question #2 - Is Loading Images Over LAN an Option with JTAG / RGH?
The **** doesn't officially support loading images over a LAN, but there are methods out there which claim to work. I haven't tried them yet myself, but the setup seems that it's plausable. Will an JTAG / RGH modified XBox support loading game backups via the XBOX's own NIC or an external one? External USB drives are ok to use, right? I plan on using Aurora.
Should I even invest in switching to JTAG / RGH as my **** allows some featrures already plus who knows if the XBOx One will soon (hopefully) have an exploit?
Well, what do you think? Thanks Guys!
I've had a modded XBox 360 for years now having first used a modchip followed by drive flashing, and now an **** with remote. I'm wanting to play a bit more again so have two questions I wanted to post, please...
Question #1 - What's Currently the best JTAG / RGH Solution?
I currently own a Phat Falcon XBox (power ratings) with a Lite-On Drive and the latest Dashboard for which I use an **** that's easily removable. The Lite-On drive is also flashed as it's what I used prior to the ****. On the site where I purchase most of my console equipment, they sell 88 items for JTAG / RGH. I know this is the CR4 XL forum, but is it still the best option (Xecuter or non-Xecuter?)
Question #2 - Is Loading Images Over LAN an Option with JTAG / RGH?
The **** doesn't officially support loading images over a LAN, but there are methods out there which claim to work. I haven't tried them yet myself, but the setup seems that it's plausable. Will an JTAG / RGH modified XBox support loading game backups via the XBOX's own NIC or an external one? External USB drives are ok to use, right? I plan on using Aurora.
Should I even invest in switching to JTAG / RGH as my **** allows some featrures already plus who knows if the XBOx One will soon (hopefully) have an exploit?
Well, what do you think? Thanks Guys!
↧
RGH Boot time
Hiya guys,
Got an issue with regards the boot time from power up into the either FSD 3 or Microsoft dashboard :(
With my shell case top removed,i can usualy get it to boot into dash in around 10-20 seconds (with DVD drive,HDD and Ethernet cable all plugged in)
but with the shell case all put together,it takes around 30 sec-1 minute to boot from power up into the dashboard.
I've tried all different DIP settings on the CR3 Lite but can't get it to boot any quicker when i have the consoles shell casing all put together :( i've used the wires that came with the CR3 Lite but i'm thinking if i changed out the "Blue CPU_RST" wire for double shielded cable ( as i have some cable left from a Sky TV engineer visit/upgrade and the cable is 50 ohm low loss.Would this maybe give me a bit better boot times with my console ?
BTW my 360 is a Falcon on RGH2
Got an issue with regards the boot time from power up into the either FSD 3 or Microsoft dashboard :(
With my shell case top removed,i can usualy get it to boot into dash in around 10-20 seconds (with DVD drive,HDD and Ethernet cable all plugged in)
but with the shell case all put together,it takes around 30 sec-1 minute to boot from power up into the dashboard.
I've tried all different DIP settings on the CR3 Lite but can't get it to boot any quicker when i have the consoles shell casing all put together :( i've used the wires that came with the CR3 Lite but i'm thinking if i changed out the "Blue CPU_RST" wire for double shielded cable ( as i have some cable left from a Sky TV engineer visit/upgrade and the cable is 50 ohm low loss.Would this maybe give me a bit better boot times with my console ?
BTW my 360 is a Falcon on RGH2
↧
↧
FALCON RGH2+ Freezes
Console Type: Falcon
Programmer Used: NAND-X
NAND Size: 16MB
Dashboard version: 2.0.17510.0
CB Version: 5774
JR Log:
================================================== =
Saturday, March 14, 2015 11:34:20 PM
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Version: 03
Flash Config: 0x00000000
Can not Continue
Version: 03
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Reading Nand to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\nanddump1.bin
Reading Nand
Done!
in 2:04 min:sec
Reading Nand to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
Reading Nand
Jtag Selected
Nand Initialization Finished
Retail Selected
Glitch Selected
Glitch2 Selected
CR4 Selected
Done!
in 2:04 min:sec
Comparing...
Nands are the same
Falcon Manually Selected
ECC created
Version: 03
Flash Config: 0x01198010
Writing Nand
image_00000000.ecc
Done!
in 0:10 min:sec
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Moving All files from output folder to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105
Glitch2 Selected
Creating Directory C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\xeBuild\17150\bin
Downloaded *xeBuild/17150/bin/addon.idx
Downloaded *xeBuild/17150/bin/nofcrt.bin
Downloaded *xeBuild/17150/bin/nohdd.bin
Downloaded *xeBuild/17150/bin/nohdmiwait.bin
Downloaded *xeBuild/17150/bin/nointmu.bin
Downloaded *xeBuild/17150/bin/nolan.bin
Downloaded *xeBuild/17150/bin/noSShdd.bin
Downloaded *xeBuild/17150/bin/patches_falcon.bin
Downloaded *xeBuild/17150/bin/patches_fat.bin
Downloaded *xeBuild/17150/bin/patches_g2corona.bin
Downloaded *xeBuild/17150/bin/patches_g2corona_WB.bin
Downloaded *xeBuild/17150/bin/patches_g2corona_WB4G.bin
Downloaded *xeBuild/17150/bin/patches_g2falcon.bin
Downloaded *xeBuild/17150/bin/patches_g2jasper.bin
Downloaded *xeBuild/17150/bin/patches_g2mcorona.bin
Downloaded *xeBuild/17150/bin/patches_g2mcorona_WB.bin
Downloaded *xeBuild/17150/bin/patches_g2mcorona_WB4G.bin
Downloaded *xeBuild/17150/bin/patches_g2mtrinity.bin
Downloaded *xeBuild/17150/bin/patches_g2trinity.bin
Downloaded *xeBuild/17150/bin/patches_g2zephyr.bin
Downloaded *xeBuild/17150/bin/patches_jasper.bin
Downloaded *xeBuild/17150/bin/patches_trinity.bin
Downloaded *xeBuild/17150/bin/patches_xenon.bin
Downloaded *xeBuild/17150/bin/patches_zephyr.bin
Downloaded *xeBuild/17150/readme.txt
Downloaded *xeBuild/17150/su20076000_00000000
Downloaded *xeBuild/17150/_glitch.ini
Downloaded *xeBuild/17150/_glitch2.ini
Downloaded *xeBuild/17150/_glitch2m.ini
Downloaded *xeBuild/17150/_jtag.ini
Downloaded *xeBuild/17150/_retail.ini
Creating Directory C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\xeBuild\common
Downloaded *xeBuild/common/cb_1921.bin
Downloaded *xeBuild/common/cb_1940.bin
Downloaded *xeBuild/common/cb_4558.bin
Downloaded *xeBuild/common/cb_4578.bin
Downloaded *xeBuild/common/cb_4579.bin
Downloaded *xeBuild/common/cb_5770.bin
Downloaded *xeBuild/common/cb_5771.bin
Downloaded *xeBuild/common/cb_6723.bin
Downloaded *xeBuild/common/cb_6750.bin
Downloaded *xeBuild/common/cba_13121.bin
Downloaded *xeBuild/common/cba_13181.bin
Downloaded *xeBuild/common/cba_13182.bin
Downloaded *xeBuild/common/cba_1928.bin
Downloaded *xeBuild/common/cba_1942.bin
Downloaded *xeBuild/common/cba_4562.bin
Downloaded *xeBuild/common/cba_4569.bin
Downloaded *xeBuild/common/cba_4574.bin
Downloaded *xeBuild/common/cba_4577.bin
Downloaded *xeBuild/common/cba_5772.bin
Downloaded *xeBuild/common/cba_5774.bin
Downloaded *xeBuild/common/cba_6752.bin
Downloaded *xeBuild/common/cba_6754.bin
Downloaded *xeBuild/common/cba_7378.bin
Downloaded *xeBuild/common/cba_9188.bin
Downloaded *xeBuild/common/cba_9188_mfg.bin
Downloaded *xeBuild/common/cba_9231.bin
Downloaded *xeBuild/common/cbb_13121.bin
Downloaded *xeBuild/common/cbb_13181.bin
Downloaded *xeBuild/common/cbb_13182.bin
Downloaded *xeBuild/common/cbb_1928.bin
Downloaded *xeBuild/common/cbb_1942.bin
Downloaded *xeBuild/common/cbb_4562.bin
Downloaded *xeBuild/common/cbb_4569.bin
Downloaded *xeBuild/common/cbb_4574.bin
Downloaded *xeBuild/common/cbb_4577.bin
Downloaded *xeBuild/common/cbb_5772.bin
Downloaded *xeBuild/common/cbb_5774.bin
Downloaded *xeBuild/common/cbb_6752.bin
Downloaded *xeBuild/common/cbb_6754.bin
Downloaded *xeBuild/common/cbb_7378.bin
Downloaded *xeBuild/common/cbb_9188.bin
Downloaded *xeBuild/common/cbb_9231.bin
Downloaded *xeBuild/common/cd_12905.bin
Downloaded *xeBuild/common/cd_13181.bin
Downloaded *xeBuild/common/cd_13182.bin
Downloaded *xeBuild/common/cd_1921.bin
Downloaded *xeBuild/common/cd_1928.bin
Downloaded *xeBuild/common/cd_1942.bin
Downloaded *xeBuild/common/cd_4558.bin
Downloaded *xeBuild/common/cd_4562.bin
Downloaded *xeBuild/common/cd_4569.bin
Downloaded *xeBuild/common/cd_4574.bin
Downloaded *xeBuild/common/cd_5770.bin
Downloaded *xeBuild/common/cd_5774.bin
Downloaded *xeBuild/common/cd_6723.bin
Downloaded *xeBuild/common/cd_6754.bin
Downloaded *xeBuild/common/cd_7378.bin
Downloaded *xeBuild/common/cd_8453.bin
Downloaded *xeBuild/common/cd_9231.bin
Downloaded *xeBuild/common/cd_9452.bin
Downloaded *xeBuild/common/ce_1888.bin
Downloaded *xeBuild/common/cf_4532.bin
Downloaded *xeBuild/common/cg_4532.bin
Downloaded *xeBuild/common/xenonclatin.xtt
Downloaded *xeBuild/common/xenonjklatin.xtt
Downloaded *xeBuild/common/ximedic.xex
Finished Checking Files
Glitch2m Selected
Glitch2 Selected
Load Files Initiliazation Finished
17150
Started Creation of the 17150 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image
---------------------------------------------------------------
C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17150.0
Console : Falcon
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 218822584105
ConsoleId : 027398019537
MoboSerial: 7578431118648415
Mfg Date : 10/08/2008
CPU Key : 0EE4917A58961DF488C03B7DB7D2817E
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 26F61A61E0A2B25FAB96422BFA4F9737
CF LDV : 25
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Version: 03
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 2:03 min:sec
updflash.bin log:
base path changed to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image
<enter> key on completion suppressed
data directory overridden from command line to '17150\'
per build directory overridden from command line to 'data\'
file name overridden from command line to 'C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin'
------ parsing user ini at 'data\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x1a0 bytes in memory
loading cpukey.txt from data\cpukey.txt
CPU Key set to: 0x0EE4917A58961DF488C03B7DB7D2817E (weight:0x35 valid; ecd: valid)
setting 1blkey from ini: 0xDD88AD0C9ED669E7B56794FB68563EFA
1BL Key set to : 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983)
xex Key set to : 0x20B185A59D28FDC340583FBB0896BF91 sum: 0x800 (expects: 0x800)
Using patchsmc option (ini file)
------ parsing ini at '17150\_glitch2.ini' ------
ini version 17150
ini: label [falconbl] found
found (1) 'cba_5772.bin' crc: 0xe3696f7e
found (2) 'cbb_5772.bin' crc: 0xfb5ab9a4
found (3) 'cd_9452.bin' crc: 0x455fa02c
found (4) 'ce_1888.bin' crc: 0xff9b60df
found (5) 'cf_17150.bin' crc: 0x0a774268
found (6) 'cg_17150.bin' crc: 0xbe8ac817
ini dictates dual CB for this model
ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0x899d7c53
found (2) 'bootanim.xex' crc: 0xe76c8e84
found (3) 'createprofile.xex' crc: 0x76c0f2c7
found (4) 'dash.xex' crc: 0xe1f07b1b
found (5) 'deviceselector.xex' crc: 0x99aff203
found (6) 'gamerprofile.xex' crc: 0x06185dc9
found (7) 'hud.xex' crc: 0x9f8dade0
found (8) 'huduiskin.xex' crc: 0xb186c353
found (9) 'mfgbootlauncher.xex' crc: 0xcb0b86e3
found (10) 'minimediaplayer.xex' crc: 0x81bb6500
found (11) 'nomni.xexp' crc: 0x7adef6f6
found (12) 'nomnifwk.xexp' crc: 0x6d7543f5
found (13) 'nomnifwm.xexp' crc: 0xa8a27e56
found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049
found (15) 'signin.xex' crc: 0x6dd20623
found (16) 'updater.xex' crc: 0x018dad7d
found (17) 'vk.xex' crc: 0x3edc0dbb
found (18) 'xam.xex' crc: 0x68767303
found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (20) 'xenonclatin.xttp' crc: 0x7a507ad1
found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb
found (23) 'ximecore.xex' crc: 0x6f9e8b97
found (24) 'ximedic.xex' crc: 0x1d992bfb
found (25) 'ximedic.xexp' crc: 0x1a4863a4
ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'fcrt.bin' crc: 0x00000000
found (5) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------
output name overridden to: C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin
1BL RSA pub key file is not available, signature checks will not be performed
PIRS RSA pub key file is not available, signature checks will not be performed
MASTER RSA pub key file is not available, signature checks will not be performed
------ Checking data\nanddump.bin ------
data\nanddump.bin file size: 0x1080000
nanddump header checks passed OK!
Loading NAND dump (0x1080000 bytes)...done!
Detecting NAND controller type from dump data...
NAND dump is from a small block machine
NAND dump uses small block controller
parsing dump into user and spare...
done!
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
CF slot 0 decrypted ok LDV 0x19 Pairing: 0x8ebaa5
CF slot 1 decrypted ok LDV 0x18 Pairing: 0x8ebaa5
setting LDV from image to 25
setting pairing data from image to 0x8ebaa5
pairing set to: 8e ba a5
MobileB.dat found at block 0x59, page 0x10 (page 0xb30), size 2048 (0x800) bytes
MobileC.dat found at block 0x1b5, page 0x0 (page 0x36a0), size 512 (0x200) bytes
MobileD.dat found at block 0x13e, page 0x18 (page 0x27d8), size 2048 (0x800) bytes
MobileE.dat found at block 0x18e, page 0x10 (page 0x31d0), size 2048 (0x800) bytes
Statistics.settings found at page 0x7bc0, size 4096 (0x1000) bytes
seeking FSRoot...fsroot found at block 0x3a6, page 0x0 (page 0x74c0) raw offset 0x74c0
seeking security files...
crl.bin found in sector 0x5a size 0xa00...verified! Will use if external file not found.
dae.bin found in sector 0x55 size 0xd9c0...verified! Will use if external file not found.
extended.bin found in sector 0x3bb size 0x4000...verified! Will use if external file not found.
secdata.bin found in sector 0x53 size 0x400...verified! Will use if external file not found.
done!
Writing initial header to flash image
------ loading system update container ------
17150\su20076000_00000000 found, loading...done!
Read 0xb37000 bytes to memory
checking integrity...
header seems valid, version 2.0.17150.0
header hash is OK, checking content hashes...
content hashes seem OK, everything looks good!
extracted SUPD\xboxupd.bin (0x79fe0 bytes)
decrypting SUPD\xboxupd.bin\CF_17150.bin (0x4560 bytes)...done!
decrypting SUPD\xboxupd.bin\CG_17150.bin (0x75a80 bytes)...done!
------ Loading bootloaders and required security files ------
reading data\SMC.bin (0x3000 bytes)
reset smc load address to 0x1000 size 0x3000
reading data\kv.bin failed, using kv.bin from nand dump
reading .\common\cba_5772.bin (0x1ac0 bytes)
loaded cba_5772.bin, could not check signature rsa key not present!
reading .\common\cbb_5772.bin (0x9350 bytes)
reading .\common\cd_9452.bin (0x4f20 bytes)
reading .\common\ce_1888.bin (0x5606a b pad 0x56070 b)
reading data\xell-gggggg.bin (0x40000 bytes)
extracted SUPD\xboxupd.bin\CF_17150.bin (0x4560 bytes)
extracted SUPD\xboxupd.bin\CG_17150.bin (0x75a80 bytes)
reading 17150\bin\patches_g2falcon.bin (0x910 bytes)
reading data\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
SMC config info:
------------------
Target temps: Cpu: 80øC Gpu: 75øC Edram: 78øC
Max temps : Cpu: 100øC Gpu: 100øC Edram: 102øC
Cpu Fan : (auto)
Gpu Fan : (auto)
MAC Address : 00:22:48:4e:0f:61
AVRegion : 0x00000100 (NTSC-M)
GameRegion : 0x00ff (NTSC/US)
DVDRegion : 1
resetKey : URUA
---------------------
Checking for smc config data patches
smc config was not patched
---------------------
could not check signature of cba_5772.bin, 1BL RSA key not present!
done!
patch slot offset reset to: 0xb0000
------ Patching BLs and modifying patches ------
Patching BLs...Done!
------ Patching boot reasons and options into flash header ------
Patching header for xell power reason
------ Encrypting and finalizing bootloaders ------
encoding SMC.bin size 0x3000
SMC checksum: 45ebe68a
unknown SMC found, type: Falcon v3.1(1.06)
glitch hack found in SMC binary!
encoding kv.bin size 0x4000
decrypted keyvault has been set for reference
Master RSA pub not available, not checking hash
encoding cba_5772.bin size 0x1ac0
encoding cbb_5772.bin size 0x9350
CB 5772 seq 0x010800d8 type: 0x01 cseq: 0x08 allow: 0x00d8
expected fuses:
fuseset 00: C0FFFFFFFFFFFFFF
fuseset 01: 0F0F0F0F0F0F0FF0 (retail)
fuseset 02: 0000000F00000000 (sequence)
fuseset 02: 000F000000000000 (allow cseq 4)
fuseset 02: 0000F00000000000 (allow cseq 5)
fuseset 02: 000000F000000000 (allow cseq 7)
fuseset 02: 0000000F00000000 (allow cseq 8)
**dual CB flag detected!**
encoding cd_9452.bin size 0x5290
encoding ce_1888.bin size 0x56070
encoding xell-gggggg.bin size 0x40000
encoding cf_17150.bin size 0x4560
encoding cg_17150.bin size 0x75a80
encoding patches_g2falcon.bin size 0x544
done!
------ Adding bootloaders to flash image ------
adding SMC.bin at raw offset 0x00001000 len 0x3000 (end 0x4000)
adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)
adding cba_5772.bin at raw offset 0x00008000 len 0x1ac0 (end 0x9ac0)
adding cbb_5772.bin at raw offset 0x00009ac0 len 0x9350 (end 0x12e10)
adding cd_9452.bin at raw offset 0x00012e10 len 0x5290 (end 0x180a0)
adding ce_1888.bin at raw offset 0x000180a0 len 0x56070 (end 0x6e110)
adding xell-gggggg.bin at raw offset 0x00070000 len 0x40000 (end 0xb0000)
adding cf_17150.bin at raw offset 0x000b0000 len 0x4560 (end 0xb4560)
adding cg_17150.bin at raw offset 0x000b4560 len 0x75a80 (end 0xc0000, rest in fs)
adding patches_g2falcon.bin at raw offset 0x000c0010 len 0x544 (end 0xc0554)
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1
at raw offset 0xd0000 len 0x00069fe0 (end: 0x00139fe0)...done!
------ adding 25 firmware files ------
extracted SUPD\aac.xexp (0x14000 bytes) (crc32: 0x899d7c53 ini: 0x899d7c53)
adding as aac.xexp1 at raw offset 0x139fe0 len 0x00014000 (end 0x0014dfe0)
extracted SUPD\bootanim.xex (0x61000 bytes) (crc32: 0xe76c8e84 ini: 0xe76c8e84)
adding as bootanim.xex at raw offset 0x150000 len 0x00061000 (end 0x001b1000)
extracted SUPD\createprofile.xex (0xc000 bytes) (crc32: 0x76c0f2c7 ini: 0x76c0f2c7)
adding as createprofile.xex at raw offset 0x1b1000 len 0x0000c000 (end 0x001bd000)
extracted SUPD\dash.xex (0x59b000 bytes) (crc32: 0xe1f07b1b ini: 0xe1f07b1b)
adding as dash.xex at raw offset 0x1c0000 len 0x0059b000 (end 0x0075b000)
extracted SUPD\deviceselector.xex (0xa000 bytes) (crc32: 0x99aff203 ini: 0x99aff203)
adding as deviceselector.xex at raw offset 0x75b000 len 0x0000a000 (end 0x00765000)
extracted SUPD\gamerprofile.xex (0x1b000 bytes) (crc32: 0x06185dc9 ini: 0x06185dc9)
adding as gamerprofile.xex at raw offset 0x766000 len 0x0001b000 (end 0x00781000)
extracted SUPD\hud.xex (0x1d000 bytes) (crc32: 0x9f8dade0 ini: 0x9f8dade0)
adding as hud.xex at raw offset 0x783000 len 0x0001d000 (end 0x007a0000)
extracted SUPD\huduiskin.xex (0x14000 bytes) (crc32: 0xb186c353 ini: 0xb186c353)
adding as huduiskin.xex at raw offset 0x7a1000 len 0x00014000 (end 0x007b5000)
extracted SUPD\mfgbootlauncher.xex (0x8000 bytes) (crc32: 0xcb0b86e3 ini: 0xcb0b86e3)
adding as mfgbootlauncher.xex at raw offset 0x7b8000 len 0x00008000 (end 0x007c0000)
extracted SUPD\minimediaplayer.xex (0xc000 bytes) (crc32: 0x81bb6500 ini: 0x81bb6500)
adding as minimediaplayer.xex at raw offset 0x7c0000 len 0x0000c000 (end 0x007cc000)
extracted SUPD\nomni.xexp (0xc800 bytes) (crc32: 0x7adef6f6 ini: 0x7adef6f6)
adding as nomni.xexp1 at raw offset 0x7cc000 len 0x0000c800 (end 0x007d8800)
extracted SUPD\nomnifwk.xexp (0x2000 bytes) (crc32: 0x6d7543f5 ini: 0x6d7543f5)
adding as nomnifwk.xexp1 at raw offset 0x7d8800 len 0x00002000 (end 0x007da800)
extracted SUPD\nomnifwm.xexp (0x5000 bytes) (crc32: 0xa8a27e56 ini: 0xa8a27e56)
adding as nomnifwm.xexp1 at raw offset 0x7de000 len 0x00005000 (end 0x007e3000)
extracted SUPD\SegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0xe0ee6049 ini: 0xe0ee6049)
adding as SegoeXbox-Light.xtt at raw offset 0x7e5000 len 0x00006000 (end 0x007eb000)
extracted SUPD\signin.xex (0x19000 bytes) (crc32: 0x6dd20623 ini: 0x6dd20623)
adding as signin.xex at raw offset 0x7ee000 len 0x00019000 (end 0x00807000)
extracted SUPD\updater.xex (0x7000 bytes) (crc32: 0x018dad7d ini: 0x018dad7d)
adding as updater.xex at raw offset 0x809000 len 0x00007000 (end 0x00810000)
extracted SUPD\vk.xex (0xb000 bytes) (crc32: 0x3edc0dbb ini: 0x3edc0dbb)
adding as vk.xex at raw offset 0x813000 len 0x0000b000 (end 0x0081e000)
extracted SUPD\xam.xex (0x253000 bytes) (crc32: 0x68767303 ini: 0x68767303)
adding as xam.xex at raw offset 0x81f000 len 0x00253000 (end 0x00a72000)
extracted nanddump\xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)
adding as xenonclatin.xtt at raw offset 0xa73000 len 0x0011b000 (end 0x00b8e000)
extracted SUPD\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)
adding as xenonclatin.xttp1 at raw offset 0xb8f000 len 0x00018000 (end 0x00ba7000)
extracted nanddump\xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)
adding as xenonjklatin.xtt at raw offset 0xba8000 len 0x001a8000 (end 0x00d50000)
extracted SUPD\xenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb ini: 0xe2adddfb)
adding as xenonjklatin.xttp1 at raw offset 0xd50000 len 0x00007000 (end 0x00d57000)
extracted SUPD\ximecore.xex (0x17000 bytes) (crc32: 0x6f9e8b97 ini: 0x6f9e8b97)
adding as ximecore.xex at raw offset 0xd57000 len 0x00017000 (end 0x00d6e000)
extracted nanddump\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)
adding as ximedic.xex at raw offset 0xd6f000 len 0x00090000 (end 0x00dff000)
extracted SUPD\ximedic.xexp (0x2800 bytes) (crc32: 0x1a4863a4 ini: 0x1a4863a4)
adding as ximedic.xexp1 at raw offset 0xe00000 len 0x00002800 (end 0x00e02800)
------ adding 5 security files ------
<- Processing crl.bin ->
reading data\crl.bin (0xa00 bytes)
crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success!
adding as crl.bin at raw offset 0xe04000 len 0x00000a00 (end 0x00e04a00)
<- Processing dae.bin ->
reading data\dae.bin (0xad30 bytes)
dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key...
success!
adding as dae.bin at raw offset 0xe08000 len 0x0000ad30 (end 0x00e12d30)
<- Processing extended.bin ->
reading data\extended.bin (0x4000 bytes)
adding as extended.bin at raw offset 0xe14000 len 0x00004000 (end 0x00e18000)
<- Processing fcrt.bin ->
fcrt.bin not found and not required by keyvault, skipped
<- Processing secdata.bin ->
reading data\secdata.bin (0x400 bytes)
adding as secdata.bin at raw offset 0xe18000 len 0x00000400 (end 0x00e18400)
------ checking for Mobile*.dat ------
MobileB.dat found, adding from previous parse
adding MobileB.dat as type 0x31 at raw offset 0xe1c000 len 0x800 (end 0xe1c800)
MobileC.dat found, adding from previous parse
adding MobileC.dat as type 0x32 at raw offset 0xe20000 len 0x200 (end 0xe20200)
MobileD.dat found, adding from previous parse
adding MobileD.dat as type 0x33 at raw offset 0xe24000 len 0x800 (end 0xe24800)
MobileE.dat found, adding from previous parse
adding MobileE.dat as type 0x34 at raw offset 0xe28000 len 0x800 (end 0xe28800)
Statistics.settings found, adding from previous parse
adding Statistics.settings at raw offset 0xf78000 len 0x1000 (end 0xf79000)
------ adding smc_config.bin ------
adding smc config to offset 0x00f7c000, len 0x400
------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image offset 0xe2c000 len 0x4000 (end 0xe30000)...done!
calculating ECD bytes and assembling raw image...done!
done remapping!
------ writing image to disk ------
writing file 'C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin' to disk...done!
---------------------------------------------------------------
C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17150.0
Console : Falcon
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 218822584105
ConsoleId : 027398019537
MoboSerial: 7578431118648415
Mfg Date : 10/08/2008
CPU Key : 0EE4917A58961DF488C03B7DB7D2817E
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 26F61A61E0A2B25FAB96422BFA4F9737
CF LDV : 25
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Was the console working before you started: Y
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y
How long is the light on for each time: approx 0.8 seconds
I have done a RGH2+ install on a falcon console and I'm experiencing some weird issues. The console glitches fine and I am able to but xell without any problems. However, when I try to boot the Xebuild image, the console either freezes midway through the boot animation, or freezes about 1 minute after I get into the dashboard. I'm really confused on this one.
Programmer Used: NAND-X
NAND Size: 16MB
Dashboard version: 2.0.17510.0
CB Version: 5774
JR Log:
================================================== =
Saturday, March 14, 2015 11:34:20 PM
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Version: 03
Flash Config: 0x00000000
Can not Continue
Version: 03
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Reading Nand to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\nanddump1.bin
Reading Nand
Done!
in 2:04 min:sec
Reading Nand to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
Reading Nand
Jtag Selected
Nand Initialization Finished
Retail Selected
Glitch Selected
Glitch2 Selected
CR4 Selected
Done!
in 2:04 min:sec
Comparing...
Nands are the same
Falcon Manually Selected
ECC created
Version: 03
Flash Config: 0x01198010
Writing Nand
image_00000000.ecc
Done!
in 0:10 min:sec
Initializing nanddump1.bin..
CpuKey is Correct
Added Key to Database
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Moving All files from output folder to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105
Glitch2 Selected
Creating Directory C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\xeBuild\17150\bin
Downloaded *xeBuild/17150/bin/addon.idx
Downloaded *xeBuild/17150/bin/nofcrt.bin
Downloaded *xeBuild/17150/bin/nohdd.bin
Downloaded *xeBuild/17150/bin/nohdmiwait.bin
Downloaded *xeBuild/17150/bin/nointmu.bin
Downloaded *xeBuild/17150/bin/nolan.bin
Downloaded *xeBuild/17150/bin/noSShdd.bin
Downloaded *xeBuild/17150/bin/patches_falcon.bin
Downloaded *xeBuild/17150/bin/patches_fat.bin
Downloaded *xeBuild/17150/bin/patches_g2corona.bin
Downloaded *xeBuild/17150/bin/patches_g2corona_WB.bin
Downloaded *xeBuild/17150/bin/patches_g2corona_WB4G.bin
Downloaded *xeBuild/17150/bin/patches_g2falcon.bin
Downloaded *xeBuild/17150/bin/patches_g2jasper.bin
Downloaded *xeBuild/17150/bin/patches_g2mcorona.bin
Downloaded *xeBuild/17150/bin/patches_g2mcorona_WB.bin
Downloaded *xeBuild/17150/bin/patches_g2mcorona_WB4G.bin
Downloaded *xeBuild/17150/bin/patches_g2mtrinity.bin
Downloaded *xeBuild/17150/bin/patches_g2trinity.bin
Downloaded *xeBuild/17150/bin/patches_g2zephyr.bin
Downloaded *xeBuild/17150/bin/patches_jasper.bin
Downloaded *xeBuild/17150/bin/patches_trinity.bin
Downloaded *xeBuild/17150/bin/patches_xenon.bin
Downloaded *xeBuild/17150/bin/patches_zephyr.bin
Downloaded *xeBuild/17150/readme.txt
Downloaded *xeBuild/17150/su20076000_00000000
Downloaded *xeBuild/17150/_glitch.ini
Downloaded *xeBuild/17150/_glitch2.ini
Downloaded *xeBuild/17150/_glitch2m.ini
Downloaded *xeBuild/17150/_jtag.ini
Downloaded *xeBuild/17150/_retail.ini
Creating Directory C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\xeBuild\common
Downloaded *xeBuild/common/cb_1921.bin
Downloaded *xeBuild/common/cb_1940.bin
Downloaded *xeBuild/common/cb_4558.bin
Downloaded *xeBuild/common/cb_4578.bin
Downloaded *xeBuild/common/cb_4579.bin
Downloaded *xeBuild/common/cb_5770.bin
Downloaded *xeBuild/common/cb_5771.bin
Downloaded *xeBuild/common/cb_6723.bin
Downloaded *xeBuild/common/cb_6750.bin
Downloaded *xeBuild/common/cba_13121.bin
Downloaded *xeBuild/common/cba_13181.bin
Downloaded *xeBuild/common/cba_13182.bin
Downloaded *xeBuild/common/cba_1928.bin
Downloaded *xeBuild/common/cba_1942.bin
Downloaded *xeBuild/common/cba_4562.bin
Downloaded *xeBuild/common/cba_4569.bin
Downloaded *xeBuild/common/cba_4574.bin
Downloaded *xeBuild/common/cba_4577.bin
Downloaded *xeBuild/common/cba_5772.bin
Downloaded *xeBuild/common/cba_5774.bin
Downloaded *xeBuild/common/cba_6752.bin
Downloaded *xeBuild/common/cba_6754.bin
Downloaded *xeBuild/common/cba_7378.bin
Downloaded *xeBuild/common/cba_9188.bin
Downloaded *xeBuild/common/cba_9188_mfg.bin
Downloaded *xeBuild/common/cba_9231.bin
Downloaded *xeBuild/common/cbb_13121.bin
Downloaded *xeBuild/common/cbb_13181.bin
Downloaded *xeBuild/common/cbb_13182.bin
Downloaded *xeBuild/common/cbb_1928.bin
Downloaded *xeBuild/common/cbb_1942.bin
Downloaded *xeBuild/common/cbb_4562.bin
Downloaded *xeBuild/common/cbb_4569.bin
Downloaded *xeBuild/common/cbb_4574.bin
Downloaded *xeBuild/common/cbb_4577.bin
Downloaded *xeBuild/common/cbb_5772.bin
Downloaded *xeBuild/common/cbb_5774.bin
Downloaded *xeBuild/common/cbb_6752.bin
Downloaded *xeBuild/common/cbb_6754.bin
Downloaded *xeBuild/common/cbb_7378.bin
Downloaded *xeBuild/common/cbb_9188.bin
Downloaded *xeBuild/common/cbb_9231.bin
Downloaded *xeBuild/common/cd_12905.bin
Downloaded *xeBuild/common/cd_13181.bin
Downloaded *xeBuild/common/cd_13182.bin
Downloaded *xeBuild/common/cd_1921.bin
Downloaded *xeBuild/common/cd_1928.bin
Downloaded *xeBuild/common/cd_1942.bin
Downloaded *xeBuild/common/cd_4558.bin
Downloaded *xeBuild/common/cd_4562.bin
Downloaded *xeBuild/common/cd_4569.bin
Downloaded *xeBuild/common/cd_4574.bin
Downloaded *xeBuild/common/cd_5770.bin
Downloaded *xeBuild/common/cd_5774.bin
Downloaded *xeBuild/common/cd_6723.bin
Downloaded *xeBuild/common/cd_6754.bin
Downloaded *xeBuild/common/cd_7378.bin
Downloaded *xeBuild/common/cd_8453.bin
Downloaded *xeBuild/common/cd_9231.bin
Downloaded *xeBuild/common/cd_9452.bin
Downloaded *xeBuild/common/ce_1888.bin
Downloaded *xeBuild/common/cf_4532.bin
Downloaded *xeBuild/common/cg_4532.bin
Downloaded *xeBuild/common/xenonclatin.xtt
Downloaded *xeBuild/common/xenonjklatin.xtt
Downloaded *xeBuild/common/ximedic.xex
Finished Checking Files
Glitch2m Selected
Glitch2 Selected
Load Files Initiliazation Finished
17150
Started Creation of the 17150 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image
---------------------------------------------------------------
C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17150.0
Console : Falcon
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 218822584105
ConsoleId : 027398019537
MoboSerial: 7578431118648415
Mfg Date : 10/08/2008
CPU Key : 0EE4917A58961DF488C03B7DB7D2817E
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 26F61A61E0A2B25FAB96422BFA4F9737
CF LDV : 25
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105
Image is Ready
Initializing updflash.bin..
Falcon/Opus
Nand Initialization Finished
Version: 03
Flash Config: 0x01198010
Writing Nand
updflash.bin
Done!
in 2:03 min:sec
updflash.bin log:
base path changed to C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\xeBuild
---- { Image Build Mode } ----
building glitch2 image
<enter> key on completion suppressed
data directory overridden from command line to '17150\'
per build directory overridden from command line to 'data\'
file name overridden from command line to 'C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin'
------ parsing user ini at 'data\options.ini' ------
loading file...done!
pre-parsing and sanitizing
done!
User options.ini loaded, 0x1a0 bytes in memory
loading cpukey.txt from data\cpukey.txt
CPU Key set to: 0x0EE4917A58961DF488C03B7DB7D2817E (weight:0x35 valid; ecd: valid)
setting 1blkey from ini: 0xDD88AD0C9ED669E7B56794FB68563EFA
1BL Key set to : 0xDD88AD0C9ED669E7B56794FB68563EFA sum: 0x983 (expects: 0x983)
xex Key set to : 0x20B185A59D28FDC340583FBB0896BF91 sum: 0x800 (expects: 0x800)
Using patchsmc option (ini file)
------ parsing ini at '17150\_glitch2.ini' ------
ini version 17150
ini: label [falconbl] found
found (1) 'cba_5772.bin' crc: 0xe3696f7e
found (2) 'cbb_5772.bin' crc: 0xfb5ab9a4
found (3) 'cd_9452.bin' crc: 0x455fa02c
found (4) 'ce_1888.bin' crc: 0xff9b60df
found (5) 'cf_17150.bin' crc: 0x0a774268
found (6) 'cg_17150.bin' crc: 0xbe8ac817
ini dictates dual CB for this model
ini: label [flashfs] found
found (1) 'aac.xexp' crc: 0x899d7c53
found (2) 'bootanim.xex' crc: 0xe76c8e84
found (3) 'createprofile.xex' crc: 0x76c0f2c7
found (4) 'dash.xex' crc: 0xe1f07b1b
found (5) 'deviceselector.xex' crc: 0x99aff203
found (6) 'gamerprofile.xex' crc: 0x06185dc9
found (7) 'hud.xex' crc: 0x9f8dade0
found (8) 'huduiskin.xex' crc: 0xb186c353
found (9) 'mfgbootlauncher.xex' crc: 0xcb0b86e3
found (10) 'minimediaplayer.xex' crc: 0x81bb6500
found (11) 'nomni.xexp' crc: 0x7adef6f6
found (12) 'nomnifwk.xexp' crc: 0x6d7543f5
found (13) 'nomnifwm.xexp' crc: 0xa8a27e56
found (14) 'SegoeXbox-Light.xtt' crc: 0xe0ee6049
found (15) 'signin.xex' crc: 0x6dd20623
found (16) 'updater.xex' crc: 0x018dad7d
found (17) 'vk.xex' crc: 0x3edc0dbb
found (18) 'xam.xex' crc: 0x68767303
found (19) 'xenonclatin.xtt' crc: 0xd5d17ff5
found (20) 'xenonclatin.xttp' crc: 0x7a507ad1
found (21) 'xenonjklatin.xtt' crc: 0xdde4a14c
found (22) 'xenonjklatin.xttp' crc: 0xe2adddfb
found (23) 'ximecore.xex' crc: 0x6f9e8b97
found (24) 'ximedic.xex' crc: 0x1d992bfb
found (25) 'ximedic.xexp' crc: 0x1a4863a4
ini: label [security] found
found (1) 'crl.bin' crc: 0x00000000
found (2) 'dae.bin' crc: 0x00000000
found (3) 'extended.bin' crc: 0x00000000
found (4) 'fcrt.bin' crc: 0x00000000
found (5) 'secdata.bin' crc: 0x00000000
------ ini parsing completed ------
output name overridden to: C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin
1BL RSA pub key file is not available, signature checks will not be performed
PIRS RSA pub key file is not available, signature checks will not be performed
MASTER RSA pub key file is not available, signature checks will not be performed
------ Checking data\nanddump.bin ------
data\nanddump.bin file size: 0x1080000
nanddump header checks passed OK!
Loading NAND dump (0x1080000 bytes)...done!
Detecting NAND controller type from dump data...
NAND dump is from a small block machine
NAND dump uses small block controller
parsing dump into user and spare...
done!
decrypting KeyVault at address 0x4000 of size 0x4000
keyvault decrypted OK, will use if no kv.bin is provided
decrypting SMC at address 0x1000 of size 0x3000
SMC decrypted OK, will use if no external smc.bin is provided
seeking smc config in dump...found at offset 0xf7c000! Using if no smc config is provided.
CF slot 0 decrypted ok LDV 0x19 Pairing: 0x8ebaa5
CF slot 1 decrypted ok LDV 0x18 Pairing: 0x8ebaa5
setting LDV from image to 25
setting pairing data from image to 0x8ebaa5
pairing set to: 8e ba a5
MobileB.dat found at block 0x59, page 0x10 (page 0xb30), size 2048 (0x800) bytes
MobileC.dat found at block 0x1b5, page 0x0 (page 0x36a0), size 512 (0x200) bytes
MobileD.dat found at block 0x13e, page 0x18 (page 0x27d8), size 2048 (0x800) bytes
MobileE.dat found at block 0x18e, page 0x10 (page 0x31d0), size 2048 (0x800) bytes
Statistics.settings found at page 0x7bc0, size 4096 (0x1000) bytes
seeking FSRoot...fsroot found at block 0x3a6, page 0x0 (page 0x74c0) raw offset 0x74c0
seeking security files...
crl.bin found in sector 0x5a size 0xa00...verified! Will use if external file not found.
dae.bin found in sector 0x55 size 0xd9c0...verified! Will use if external file not found.
extended.bin found in sector 0x3bb size 0x4000...verified! Will use if external file not found.
secdata.bin found in sector 0x53 size 0x400...verified! Will use if external file not found.
done!
Writing initial header to flash image
------ loading system update container ------
17150\su20076000_00000000 found, loading...done!
Read 0xb37000 bytes to memory
checking integrity...
header seems valid, version 2.0.17150.0
header hash is OK, checking content hashes...
content hashes seem OK, everything looks good!
extracted SUPD\xboxupd.bin (0x79fe0 bytes)
decrypting SUPD\xboxupd.bin\CF_17150.bin (0x4560 bytes)...done!
decrypting SUPD\xboxupd.bin\CG_17150.bin (0x75a80 bytes)...done!
------ Loading bootloaders and required security files ------
reading data\SMC.bin (0x3000 bytes)
reset smc load address to 0x1000 size 0x3000
reading data\kv.bin failed, using kv.bin from nand dump
reading .\common\cba_5772.bin (0x1ac0 bytes)
loaded cba_5772.bin, could not check signature rsa key not present!
reading .\common\cbb_5772.bin (0x9350 bytes)
reading .\common\cd_9452.bin (0x4f20 bytes)
reading .\common\ce_1888.bin (0x5606a b pad 0x56070 b)
reading data\xell-gggggg.bin (0x40000 bytes)
extracted SUPD\xboxupd.bin\CF_17150.bin (0x4560 bytes)
extracted SUPD\xboxupd.bin\CG_17150.bin (0x75a80 bytes)
reading 17150\bin\patches_g2falcon.bin (0x910 bytes)
reading data\smc_config.bin failed, using smc_config.bin from nand dump
-------------------
checking smc_config
-------------------
extracting config
------------------
SMC config info:
------------------
Target temps: Cpu: 80øC Gpu: 75øC Edram: 78øC
Max temps : Cpu: 100øC Gpu: 100øC Edram: 102øC
Cpu Fan : (auto)
Gpu Fan : (auto)
MAC Address : 00:22:48:4e:0f:61
AVRegion : 0x00000100 (NTSC-M)
GameRegion : 0x00ff (NTSC/US)
DVDRegion : 1
resetKey : URUA
---------------------
Checking for smc config data patches
smc config was not patched
---------------------
could not check signature of cba_5772.bin, 1BL RSA key not present!
done!
patch slot offset reset to: 0xb0000
------ Patching BLs and modifying patches ------
Patching BLs...Done!
------ Patching boot reasons and options into flash header ------
Patching header for xell power reason
------ Encrypting and finalizing bootloaders ------
encoding SMC.bin size 0x3000
SMC checksum: 45ebe68a
unknown SMC found, type: Falcon v3.1(1.06)
glitch hack found in SMC binary!
encoding kv.bin size 0x4000
decrypted keyvault has been set for reference
Master RSA pub not available, not checking hash
encoding cba_5772.bin size 0x1ac0
encoding cbb_5772.bin size 0x9350
CB 5772 seq 0x010800d8 type: 0x01 cseq: 0x08 allow: 0x00d8
expected fuses:
fuseset 00: C0FFFFFFFFFFFFFF
fuseset 01: 0F0F0F0F0F0F0FF0 (retail)
fuseset 02: 0000000F00000000 (sequence)
fuseset 02: 000F000000000000 (allow cseq 4)
fuseset 02: 0000F00000000000 (allow cseq 5)
fuseset 02: 000000F000000000 (allow cseq 7)
fuseset 02: 0000000F00000000 (allow cseq 8)
**dual CB flag detected!**
encoding cd_9452.bin size 0x5290
encoding ce_1888.bin size 0x56070
encoding xell-gggggg.bin size 0x40000
encoding cf_17150.bin size 0x4560
encoding cg_17150.bin size 0x75a80
encoding patches_g2falcon.bin size 0x544
done!
------ Adding bootloaders to flash image ------
adding SMC.bin at raw offset 0x00001000 len 0x3000 (end 0x4000)
adding kv.bin at raw offset 0x00004000 len 0x4000 (end 0x8000)
adding cba_5772.bin at raw offset 0x00008000 len 0x1ac0 (end 0x9ac0)
adding cbb_5772.bin at raw offset 0x00009ac0 len 0x9350 (end 0x12e10)
adding cd_9452.bin at raw offset 0x00012e10 len 0x5290 (end 0x180a0)
adding ce_1888.bin at raw offset 0x000180a0 len 0x56070 (end 0x6e110)
adding xell-gggggg.bin at raw offset 0x00070000 len 0x40000 (end 0xb0000)
adding cf_17150.bin at raw offset 0x000b0000 len 0x4560 (end 0xb4560)
adding cg_17150.bin at raw offset 0x000b4560 len 0x75a80 (end 0xc0000, rest in fs)
adding patches_g2falcon.bin at raw offset 0x000c0010 len 0x544 (end 0xc0554)
Fixing up FS table...done!
Writing zeropair CG patch slot overflow data to sysupdate.xexp1
at raw offset 0xd0000 len 0x00069fe0 (end: 0x00139fe0)...done!
------ adding 25 firmware files ------
extracted SUPD\aac.xexp (0x14000 bytes) (crc32: 0x899d7c53 ini: 0x899d7c53)
adding as aac.xexp1 at raw offset 0x139fe0 len 0x00014000 (end 0x0014dfe0)
extracted SUPD\bootanim.xex (0x61000 bytes) (crc32: 0xe76c8e84 ini: 0xe76c8e84)
adding as bootanim.xex at raw offset 0x150000 len 0x00061000 (end 0x001b1000)
extracted SUPD\createprofile.xex (0xc000 bytes) (crc32: 0x76c0f2c7 ini: 0x76c0f2c7)
adding as createprofile.xex at raw offset 0x1b1000 len 0x0000c000 (end 0x001bd000)
extracted SUPD\dash.xex (0x59b000 bytes) (crc32: 0xe1f07b1b ini: 0xe1f07b1b)
adding as dash.xex at raw offset 0x1c0000 len 0x0059b000 (end 0x0075b000)
extracted SUPD\deviceselector.xex (0xa000 bytes) (crc32: 0x99aff203 ini: 0x99aff203)
adding as deviceselector.xex at raw offset 0x75b000 len 0x0000a000 (end 0x00765000)
extracted SUPD\gamerprofile.xex (0x1b000 bytes) (crc32: 0x06185dc9 ini: 0x06185dc9)
adding as gamerprofile.xex at raw offset 0x766000 len 0x0001b000 (end 0x00781000)
extracted SUPD\hud.xex (0x1d000 bytes) (crc32: 0x9f8dade0 ini: 0x9f8dade0)
adding as hud.xex at raw offset 0x783000 len 0x0001d000 (end 0x007a0000)
extracted SUPD\huduiskin.xex (0x14000 bytes) (crc32: 0xb186c353 ini: 0xb186c353)
adding as huduiskin.xex at raw offset 0x7a1000 len 0x00014000 (end 0x007b5000)
extracted SUPD\mfgbootlauncher.xex (0x8000 bytes) (crc32: 0xcb0b86e3 ini: 0xcb0b86e3)
adding as mfgbootlauncher.xex at raw offset 0x7b8000 len 0x00008000 (end 0x007c0000)
extracted SUPD\minimediaplayer.xex (0xc000 bytes) (crc32: 0x81bb6500 ini: 0x81bb6500)
adding as minimediaplayer.xex at raw offset 0x7c0000 len 0x0000c000 (end 0x007cc000)
extracted SUPD\nomni.xexp (0xc800 bytes) (crc32: 0x7adef6f6 ini: 0x7adef6f6)
adding as nomni.xexp1 at raw offset 0x7cc000 len 0x0000c800 (end 0x007d8800)
extracted SUPD\nomnifwk.xexp (0x2000 bytes) (crc32: 0x6d7543f5 ini: 0x6d7543f5)
adding as nomnifwk.xexp1 at raw offset 0x7d8800 len 0x00002000 (end 0x007da800)
extracted SUPD\nomnifwm.xexp (0x5000 bytes) (crc32: 0xa8a27e56 ini: 0xa8a27e56)
adding as nomnifwm.xexp1 at raw offset 0x7de000 len 0x00005000 (end 0x007e3000)
extracted SUPD\SegoeXbox-Light.xtt (0x6000 bytes) (crc32: 0xe0ee6049 ini: 0xe0ee6049)
adding as SegoeXbox-Light.xtt at raw offset 0x7e5000 len 0x00006000 (end 0x007eb000)
extracted SUPD\signin.xex (0x19000 bytes) (crc32: 0x6dd20623 ini: 0x6dd20623)
adding as signin.xex at raw offset 0x7ee000 len 0x00019000 (end 0x00807000)
extracted SUPD\updater.xex (0x7000 bytes) (crc32: 0x018dad7d ini: 0x018dad7d)
adding as updater.xex at raw offset 0x809000 len 0x00007000 (end 0x00810000)
extracted SUPD\vk.xex (0xb000 bytes) (crc32: 0x3edc0dbb ini: 0x3edc0dbb)
adding as vk.xex at raw offset 0x813000 len 0x0000b000 (end 0x0081e000)
extracted SUPD\xam.xex (0x253000 bytes) (crc32: 0x68767303 ini: 0x68767303)
adding as xam.xex at raw offset 0x81f000 len 0x00253000 (end 0x00a72000)
extracted nanddump\xenonclatin.xtt (0x11b000 bytes) (crc32: 0xd5d17ff5 ini: 0xd5d17ff5)
adding as xenonclatin.xtt at raw offset 0xa73000 len 0x0011b000 (end 0x00b8e000)
extracted SUPD\xenonclatin.xttp (0x18000 bytes) (crc32: 0x7a507ad1 ini: 0x7a507ad1)
adding as xenonclatin.xttp1 at raw offset 0xb8f000 len 0x00018000 (end 0x00ba7000)
extracted nanddump\xenonjklatin.xtt (0x1a8000 bytes) (crc32: 0xdde4a14c ini: 0xdde4a14c)
adding as xenonjklatin.xtt at raw offset 0xba8000 len 0x001a8000 (end 0x00d50000)
extracted SUPD\xenonjklatin.xttp (0x7000 bytes) (crc32: 0xe2adddfb ini: 0xe2adddfb)
adding as xenonjklatin.xttp1 at raw offset 0xd50000 len 0x00007000 (end 0x00d57000)
extracted SUPD\ximecore.xex (0x17000 bytes) (crc32: 0x6f9e8b97 ini: 0x6f9e8b97)
adding as ximecore.xex at raw offset 0xd57000 len 0x00017000 (end 0x00d6e000)
extracted nanddump\ximedic.xex (0x90000 bytes) (crc32: 0x1d992bfb ini: 0x1d992bfb)
adding as ximedic.xex at raw offset 0xd6f000 len 0x00090000 (end 0x00dff000)
extracted SUPD\ximedic.xexp (0x2800 bytes) (crc32: 0x1a4863a4 ini: 0x1a4863a4)
adding as ximedic.xexp1 at raw offset 0xe00000 len 0x00002800 (end 0x00e02800)
------ adding 5 security files ------
<- Processing crl.bin ->
reading data\crl.bin (0xa00 bytes)
crl appears crypted, attempting to decrypt with CPU key...failed! Trying alternate key...success!
adding as crl.bin at raw offset 0xe04000 len 0x00000a00 (end 0x00e04a00)
<- Processing dae.bin ->
reading data\dae.bin (0xad30 bytes)
dae appears encrypted, attempting to decrypt with CPU key...failed! Attempting to decrypt with alternate key...
success!
adding as dae.bin at raw offset 0xe08000 len 0x0000ad30 (end 0x00e12d30)
<- Processing extended.bin ->
reading data\extended.bin (0x4000 bytes)
adding as extended.bin at raw offset 0xe14000 len 0x00004000 (end 0x00e18000)
<- Processing fcrt.bin ->
fcrt.bin not found and not required by keyvault, skipped
<- Processing secdata.bin ->
reading data\secdata.bin (0x400 bytes)
adding as secdata.bin at raw offset 0xe18000 len 0x00000400 (end 0x00e18400)
------ checking for Mobile*.dat ------
MobileB.dat found, adding from previous parse
adding MobileB.dat as type 0x31 at raw offset 0xe1c000 len 0x800 (end 0xe1c800)
MobileC.dat found, adding from previous parse
adding MobileC.dat as type 0x32 at raw offset 0xe20000 len 0x200 (end 0xe20200)
MobileD.dat found, adding from previous parse
adding MobileD.dat as type 0x33 at raw offset 0xe24000 len 0x800 (end 0xe24800)
MobileE.dat found, adding from previous parse
adding MobileE.dat as type 0x34 at raw offset 0xe28000 len 0x800 (end 0xe28800)
Statistics.settings found, adding from previous parse
adding Statistics.settings at raw offset 0xf78000 len 0x1000 (end 0xf79000)
------ adding smc_config.bin ------
adding smc config to offset 0x00f7c000, len 0x400
------ finalizing image ------
Fixing up empty FS block entries...done!
Writing FS table to image offset 0xe2c000 len 0x4000 (end 0xe30000)...done!
calculating ECD bytes and assembling raw image...done!
done remapping!
------ writing image to disk ------
writing file 'C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin' to disk...done!
---------------------------------------------------------------
C:\Users\OrangeProfessor\Desktop\J-Runner v3 (5) Core Pack\218822584105\updflash.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17150.0
Console : Falcon
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 218822584105
ConsoleId : 027398019537
MoboSerial: 7578431118648415
Mfg Date : 10/08/2008
CPU Key : 0EE4917A58961DF488C03B7DB7D2817E
1BL Key : DD88AD0C9ED669E7B56794FB68563EFA
DVD Key : 26F61A61E0A2B25FAB96422BFA4F9737
CF LDV : 25
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Was the console working before you started: Y
Do you get a green debug light appear on the CR4 XL chip every 4-5 seconds: Y
How long is the light on for each time: approx 0.8 seconds
I have done a RGH2+ install on a falcon console and I'm experiencing some weird issues. The console glitches fine and I am able to but xell without any problems. However, when I try to boot the Xebuild image, the console either freezes midway through the boot animation, or freezes about 1 minute after I get into the dashboard. I'm really confused on this one.
↧
RGH lots of errors when i dump nand
so i get these errors when i try to rgh2 my jasper sb.
Trinity, Jasper 16MB
Jasper 16MB Manually Selected
Reading Nand to C:\Users\Badass\Downloads\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Error: 201 reading block 0
Error: 211 reading block 1
Error: 201 reading block 2
Error: 201 reading block 3
Error: 201 reading block 4
Error: 211 reading block 5
Error: 201 reading block 6
Error: 201 reading block 7
Error: 211 reading block 8
Error: 211 reading block 9
Error: 211 reading block A
Error: 201 reading block B
Error: 201 reading block C
Error: 201 reading block D
Error: 201 reading block E
Error: 201 reading block F
Error: 201 reading block 10
Error: 211 reading block 11
Error: 211 reading block 12
Error: 201 reading block 13
Error: 201 reading block 14
Error: 201 reading block 15
Error: 201 reading block 16
Error: 211 reading block 17
Error: 211 reading block 18
Error: 211 reading block 19
Error: 211 reading block 1A
Error: 201 reading block 1B
Error: 201 reading block 1C
Error: 211 reading block 1D
Error: 201 reading block 1E
Error: 201 reading block 1F
Error: 211 reading block 20
Error: 201 reading block 21
Error: 201 reading block 22
Error: 201 reading block 23
Error: 201 reading block 24
Error: 201 reading block 25
Error: 211 reading block 26
Error: 201 reading block 27
Error: 211 reading block 28
Error: 201 reading block 29
Error: 201 reading block 2A
Error: 211 reading block 2B
Error: 201 reading block 2C
Error: 201 reading block 2D
Error: 201 reading block 2E
Error: 201 reading block 2F
Error: 201 reading block 30
Error: 201 reading block 31
Error: 201 reading block 32
Error: 201 reading block 33
Error: 211 reading block 34
Error: 201 reading block 35
Error: 201 reading block 36
Error: 211 reading block 37
Error: 201 reading block 38
Error: 201 reading block 39
Error: 201 reading block 3A
Error: 201 reading block 3B
Error: 201 reading block 3C
Error: 211 reading block 3D
Error: 201 reading block 3E
Error: 201 reading block 3F
Error: 201 reading block 40
Error: 201 reading block 41
Error: 211 reading block 42
Error: 211 reading block 43
Error: 201 reading block 44
Error: 211 reading block 45
Error: 201 reading block 46
Error: 211 reading block 47
Done!
in 0:40 min:sec
any ideas? sorry no pics. my wife has the only phone with a camera and she is 100 miles away
Trinity, Jasper 16MB
Jasper 16MB Manually Selected
Reading Nand to C:\Users\Badass\Downloads\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Error: 201 reading block 0
Error: 211 reading block 1
Error: 201 reading block 2
Error: 201 reading block 3
Error: 201 reading block 4
Error: 211 reading block 5
Error: 201 reading block 6
Error: 201 reading block 7
Error: 211 reading block 8
Error: 211 reading block 9
Error: 211 reading block A
Error: 201 reading block B
Error: 201 reading block C
Error: 201 reading block D
Error: 201 reading block E
Error: 201 reading block F
Error: 201 reading block 10
Error: 211 reading block 11
Error: 211 reading block 12
Error: 201 reading block 13
Error: 201 reading block 14
Error: 201 reading block 15
Error: 201 reading block 16
Error: 211 reading block 17
Error: 211 reading block 18
Error: 211 reading block 19
Error: 211 reading block 1A
Error: 201 reading block 1B
Error: 201 reading block 1C
Error: 211 reading block 1D
Error: 201 reading block 1E
Error: 201 reading block 1F
Error: 211 reading block 20
Error: 201 reading block 21
Error: 201 reading block 22
Error: 201 reading block 23
Error: 201 reading block 24
Error: 201 reading block 25
Error: 211 reading block 26
Error: 201 reading block 27
Error: 211 reading block 28
Error: 201 reading block 29
Error: 201 reading block 2A
Error: 211 reading block 2B
Error: 201 reading block 2C
Error: 201 reading block 2D
Error: 201 reading block 2E
Error: 201 reading block 2F
Error: 201 reading block 30
Error: 201 reading block 31
Error: 201 reading block 32
Error: 201 reading block 33
Error: 211 reading block 34
Error: 201 reading block 35
Error: 201 reading block 36
Error: 211 reading block 37
Error: 201 reading block 38
Error: 201 reading block 39
Error: 201 reading block 3A
Error: 201 reading block 3B
Error: 201 reading block 3C
Error: 211 reading block 3D
Error: 201 reading block 3E
Error: 201 reading block 3F
Error: 201 reading block 40
Error: 201 reading block 41
Error: 211 reading block 42
Error: 211 reading block 43
Error: 201 reading block 44
Error: 211 reading block 45
Error: 201 reading block 46
Error: 211 reading block 47
Done!
in 0:40 min:sec
any ideas? sorry no pics. my wife has the only phone with a camera and she is 100 miles away
↧
[FOR SALE] TX R-JTAG QSB V3
Hi,
Does anyone know where I can get hold of these in the UK or Europe?
Does anyone know where I can get hold of these in the UK or Europe?
↧
X360USB PRO TX USB PRO V2 NOT WORK, DETECTING, but CK3i Not working
Hi all
Please sorry from my english
I am buy 1 pieces tx usp pro v2
Work more 1 year, after dead
I am buy new usb pro v2 from modchipcentral
Work only 3 mouth
After dead
Usb pro v2 detecting in Jungler Flasher, but ck3i not be
Too buttom EJECT not be work:(
I am choose AUTO-MANUAL buttom bot not any
After I am desolder pl2303 chip
I am see that be nand-x update cable have this chip
Nand-x update cable not need be from me, becuase I am have JR1 and JR2 Programmer
So, I am desolder this chip from nand-x udpate cable and solder from usb pro v2
CK3I DETECTED!!!!
But Additionla functions from Jungler Flasher not be work
Buttom EJECT TOO not be work:(
Please help me, very need
Please too see a photo (what it is the this chip , red color)
![Name: tx.png
Views: 5
Size: 547.5 KB]()
Please sorry from my english
I am buy 1 pieces tx usp pro v2
Work more 1 year, after dead
I am buy new usb pro v2 from modchipcentral
Work only 3 mouth
After dead
Usb pro v2 detecting in Jungler Flasher, but ck3i not be
Too buttom EJECT not be work:(
I am choose AUTO-MANUAL buttom bot not any
After I am desolder pl2303 chip
I am see that be nand-x update cable have this chip
Nand-x update cable not need be from me, becuase I am have JR1 and JR2 Programmer
So, I am desolder this chip from nand-x udpate cable and solder from usb pro v2
CK3I DETECTED!!!!
But Additionla functions from Jungler Flasher not be work
Buttom EJECT TOO not be work:(
Please help me, very need
Please too see a photo (what it is the this chip , red color)
↧
↧
Cannot see conX folder.
Hi all. I've FSD rev 775 installed. I'm trying to stream games from my computer HDD to my xbox 360.
I followed this tutorial
http://digiex.net/guides-reviews/con...tyle-dash.html
I tried this yesterday on a Wireless Lan, I could see the conX folder in the root of my 360 (In freestyle file manager) Drive, it just doesn't want to work on lan. I tried setting up ip manually, no luck. I've not set the ip to auto, still no luck
I can access my workgroup through SMB, I'm not quite sure why can't I see the conX folder when connected to LAN.
Any help will be appreciated.
I followed this tutorial
http://digiex.net/guides-reviews/con...tyle-dash.html
I tried this yesterday on a Wireless Lan, I could see the conX folder in the root of my 360 (In freestyle file manager) Drive, it just doesn't want to work on lan. I tried setting up ip manually, no luck. I've not set the ip to auto, still no luck
I can access my workgroup through SMB, I'm not quite sure why can't I see the conX folder when connected to LAN.
Any help will be appreciated.
↧
recommendations or thought for a case mod please
ok heres a basic spray job i did some time ago which i sold a while back. i have now modded a falcon which has silent cooling fans inside 75mm covering the gpu heatsink and obviously the dvd drive will no longer go inside, so i have soldered using heat shrink and made the dvd drive power cable and sata cable long enough to reach the drive on the outside. so basically it still looks like a normal falcon except there is the working dvd drive on top of the casing on the outside. i cut an old 360 drive about 50mm of the front so i could still use the screw standoffs and mount the eject button hence still looking the same. what i would like to ask is all your input on a way to disguise the outer drive so it looks like summat else other than a benq drive, for example i first thought of putting a r/c nitro car shell over the top or even a r/c tank turret about 1/16th size, any other suggestions out there?
↧
[WANTED] XCGPU
Looking for a xcgpu with nand dump. Pm info. Thanks
↧