hi I'm in desperate need of someone from the uk who can convert a 4gb corona v2 nand to a 16mb nand as my retail nand is corrupt so I am unable to even write ecc
↧
need 4gb nand converted
↧
punisher fan grills (3-d printed)
i just 3-d printed these fan grills for a xbox 360 arcade cab i am working on they came out great.check out the video to see how i made them and please like and subscribe to my youtube channel for mods and tutorials.
![]()
↧
↧
RGH RGH 1.2 RRODs when boot xell
delete
↧
My Lite On ihas124 B is DEAD...
Hi, as i wrote in the title myLite On ihas124 B is DEAD.
The only revision i can find in my country (GREECE) is F but neither EEPROM_Utility-6.2.0 or BurnerMAX can flashit it.
Is there any way in flash it or i'm busted ....
Thank you in advance
![]()
![]()
The only revision i can find in my country (GREECE) is F but neither EEPROM_Utility-6.2.0 or BurnerMAX can flashit it.
Is there any way in flash it or i'm busted ....
Thank you in advance
↧
Best method to copy external hdd
I have an rgh xbox360 slim setup with a 2 TB external hdd filled with my games on it. I want to copy this drive onto another external hdd as a backup just in case something goes wrong unexpected and fails. What is the best method to accomplishing this task? If there is software specific that could do this please be specific.
Also what is the largest internal hdd I could mount into my Xbox360 slim and which is the best one?
Also what is the largest internal hdd I could mount into my Xbox360 slim and which is the best one?
↧
↧
Jasper Won't Boot After Rgh 1.2 Attempt
Hey guys, so long story short I was attempting to rgh my jasper. I dumped my nand, created dcc and wrote xell. After an attempted fail, I took the coolrunner off and nand-x wires. It turns on but won't boot. No pictures come on. Only the middle LED blinks in the rf module. Any ideas?
↧
R-JTAG Falcon powers on but nothing else.
TX Product(s) used: J-R Programmer v2, CR4 XL, R-JTAG QSB v3
Console Type: Falcon
NAND size: 16 I think
Dashboard version: 2.0.17349
CB version: 5770
Description of Problem:
System doesn't boot into Xell to obtain CPU key in order to proceed with the next stage of creating the XeBuild Image and writing to NAND.
Console starts up with only the middle green light flashing. CR4 green debug lights every 4-5 seconds although I did see it flash about 15 times but only happened the once.
No errors seem to appear with reading/writing using J-Runner.
Checked continuity of R-JTAG QSB ok.
Was the console working before you started: Y
Green debug light every 4-5 seconds: Y
I've re-soldered all the points which lead to some extra repair work required by replacing the 33ohm resistor. I'm now at a loose end of what I can do now if anything so I'm now seeking help from the TX experts!
I'm a noob in the X360 scene but not with TX products. My nephew is still using my original xbox and X3 with X3 Control Panel :smile:
Thanks in advance!
I'm having trouble upload images at the mo. ALL images I have to upload mount up to just under 1MB. The warning I get is: 500 [IOErrorEvent type = "ioError " bubbles=false cancelable=false eventPhase=2 text="Error #2038"]
Console Type: Falcon
NAND size: 16 I think
Dashboard version: 2.0.17349
CB version: 5770
Description of Problem:
System doesn't boot into Xell to obtain CPU key in order to proceed with the next stage of creating the XeBuild Image and writing to NAND.
Console starts up with only the middle green light flashing. CR4 green debug lights every 4-5 seconds although I did see it flash about 15 times but only happened the once.
No errors seem to appear with reading/writing using J-Runner.
Checked continuity of R-JTAG QSB ok.
Was the console working before you started: Y
Green debug light every 4-5 seconds: Y
I've re-soldered all the points which lead to some extra repair work required by replacing the 33ohm resistor. I'm now at a loose end of what I can do now if anything so I'm now seeking help from the TX experts!
I'm a noob in the X360 scene but not with TX products. My nephew is still using my original xbox and X3 with X3 Control Panel :smile:
Thanks in advance!
I'm having trouble upload images at the mo. ALL images I have to upload mount up to just under 1MB. The warning I get is: 500 [IOErrorEvent type = "ioError " bubbles=false cancelable=false eventPhase=2 text="Error #2038"]
↧
RGH RGH 1.2 Coolrunner is glitching but no xell boot
my coolrunner is glitching but my jasper never boots ive tried a bunch of timing files
the download i got for timing file doesnt of cr so do i just use ma trix files?
and now trying to fix it i have no lights
the download i got for timing file doesnt of cr so do i just use ma trix files?
and now trying to fix it i have no lights
↧
GENERAL X360S Trinity beep but no boot, HANA horror (NO RGH)
Hey Guys
I got myself a Xbox 360 Slim Trinity today.
It boots correctly, goes to the dashboard but it has a DVD drive which is not functioning correctly (Open Tray problem), so i shut it down to go and look for the problem.
The guy i got the xbox from told me that he had a **** installed, but not anymore.
So the first thing i thought of was the SATA cable which can get faulty after some fiddling.
After replacing the SATA cable i tried to fire it up again but didn't boot anymore.
When i press the power/eject button you hear the PING, green light for a second, and nothing.
No spinning fans, no sound, PSU not powering on.
So when i opened the xbox up again and took the DVD drive out i found a horror story around the HANA chip. It looks like a cap exploded and like someone pulled some things out with force.
As you can see on the picture below:
![]()
Bigger picture
Resistor R3B15 was missing, a wire was soldered and was going to the underside of the board, the Trace left of R3B15 is completely gone and all caps/pads around are black (and a bit fluffy). Looks like a RGH was used, burned out and has been removed. The cable from R3B15 to the bottom was going to this trace and was loose:
![]()
Bigger picture
In the middle of the picture, just right of the hole and left of the (foxconn) text is a visible trace of copper. I've found out that this trace is in connection with the trace to R3B15. So they apparently tried to bridge it.
I've resoldered a 33Ohm resistor at R3B15 and i've repared the bridge but still no boot.
I've also resoldered the wire to the pad below (don't have a pictre of that yet...)
When i measure between right of the resistor and at the point just below C2C5 (where the trace is going to) i also measure a nice 33 Ohm. If i measure left of the resistor and the point below C2C5 i get a beep.
I figured that this should indicate that the connection is fine?
When i connect everything and try to turn it on i just get the beep, a green light for a short second and nothing more. The PSU light is amber and does not switch on.
I find it so very odd that the xbox booted before (with problems that is) and after just (carefully) replacing the SATA cable nothing works anymore.
Do you guys have any clue what to check next?
Is the bridge not good? (STBY_CLK right?)
Or are there other things to check?
I have an oscilloscope available, so i can check the signals on the trace going to/from R3B15 if needed.
I got myself a Xbox 360 Slim Trinity today.
It boots correctly, goes to the dashboard but it has a DVD drive which is not functioning correctly (Open Tray problem), so i shut it down to go and look for the problem.
The guy i got the xbox from told me that he had a **** installed, but not anymore.
So the first thing i thought of was the SATA cable which can get faulty after some fiddling.
After replacing the SATA cable i tried to fire it up again but didn't boot anymore.
When i press the power/eject button you hear the PING, green light for a second, and nothing.
No spinning fans, no sound, PSU not powering on.
So when i opened the xbox up again and took the DVD drive out i found a horror story around the HANA chip. It looks like a cap exploded and like someone pulled some things out with force.
As you can see on the picture below:
Bigger picture
Resistor R3B15 was missing, a wire was soldered and was going to the underside of the board, the Trace left of R3B15 is completely gone and all caps/pads around are black (and a bit fluffy). Looks like a RGH was used, burned out and has been removed. The cable from R3B15 to the bottom was going to this trace and was loose:
Bigger picture
In the middle of the picture, just right of the hole and left of the (foxconn) text is a visible trace of copper. I've found out that this trace is in connection with the trace to R3B15. So they apparently tried to bridge it.
I've resoldered a 33Ohm resistor at R3B15 and i've repared the bridge but still no boot.
I've also resoldered the wire to the pad below (don't have a pictre of that yet...)
When i measure between right of the resistor and at the point just below C2C5 (where the trace is going to) i also measure a nice 33 Ohm. If i measure left of the resistor and the point below C2C5 i get a beep.
I figured that this should indicate that the connection is fine?
When i connect everything and try to turn it on i just get the beep, a green light for a short second and nothing more. The PSU light is amber and does not switch on.
I find it so very odd that the xbox booted before (with problems that is) and after just (carefully) replacing the SATA cable nothing works anymore.
Do you guys have any clue what to check next?
Is the bridge not good? (STBY_CLK right?)
Or are there other things to check?
I have an oscilloscope available, so i can check the signals on the trace going to/from R3B15 if needed.
↧
↧
RGH Can This XBOX be RGH??
Hi,
I'm about to buy a used slim console , i wonder if it can be RGH??
https://www.dropbox.com/s/pfrqzzxvpo..._2033.JPG?dl=0
I'm about to buy a used slim console , i wonder if it can be RGH??
https://www.dropbox.com/s/pfrqzzxvpo..._2033.JPG?dl=0
↧
Need help
Hi im using jr programmer and coolrunner and everytime I try to witre ecc it comes up with loads of errors can any one help
↧
JASPER CR4 RGH2 Jasper 512mb wont glitch
Decided to try something else. Please close.
↧
Jasper BB 256mb Boots WITHOUT Stby_CLK
well my console would not turn on, removed stby_clk and bam it booted my rgh image.
console now boots first glitch without the wire
anyone ever seen this?
my CR3 lite is AUTHENTIC
console now boots first glitch without the wire
anyone ever seen this?
my CR3 lite is AUTHENTIC
↧
↧
Need help. Bootloader OFF and still coming HID!!
Im doing my friends drive and I accidentally set boot loader ON then connected it to my PC.
Noe when I unplug it and reset the PC and Now set it to OFF I plug in the USB Pro V2 And it still comes up as
HID-compliant device. In other words Xecuter CK3i shoes up but not the X360 PORT IO thing under Device manager..
Help It's worked before and i've tried to uninstall the driver but it keeps coming back
Noe when I unplug it and reset the PC and Now set it to OFF I plug in the USB Pro V2 And it still comes up as
HID-compliant device. In other words Xecuter CK3i shoes up but not the X360 PORT IO thing under Device manager..
Help It's worked before and i've tried to uninstall the driver but it keeps coming back
↧
hello, im papalong
hello, intrested in falcon hack but i am a newbie and am looking to mod my falcon 2.0.12416.0 shout out to anyone that can help
↧
coolrunner switch broke any help fml
bad pic but i booted to xell then i update timing file and it broke when i tried to flip it back to normal mode
is there any way i can just bridge a few points
https://gyazo.com/32497e4a2695d5473e571265a77ec463
is there any way i can just bridge a few points
https://gyazo.com/32497e4a2695d5473e571265a77ec463
↧
RGH PES 16 - fatal crash intercepted after updating dashboard to 17349
I downloaded pro evolution soccer 16 and when I try to play the game I get the message fatal crash intercepted. I updated the dashboard to 17349 and the avatar working. What should I do to play this game? The othe work ok.
↧
↧
Pls, help to define R2D19 resistance
Hello !
I've been cleaning xbox 360S of my friend, because of red dot.
Now the console is booting, but no video on output.
Seems to me after additional inspection, I managed somehow to
break the R2D19 resistor, it is missing.
Pls, help to define the resistance of that resistor.
Thank you !
I've been cleaning xbox 360S of my friend, because of red dot.
Now the console is booting, but no video on output.
Seems to me after additional inspection, I managed somehow to
break the R2D19 resistor, it is missing.
Pls, help to define the resistance of that resistor.
Thank you !
↧
JR Programmer v1.1 Nand cable
Hello,
So my cat chew on my nand cable and destroyed the plug on it.
So i was searching for a new cable and after contacting some website and non had some i found this: Xecuter Pin Header Kabel Set
Website to it: http://save-mii.com/tne/product/19/3...abel-Set-.html
Will this fit or do you guys got any other ideas?
:cool:
p.s. i didnt know where to post so i hope i posted in the right section.
So my cat chew on my nand cable and destroyed the plug on it.
So i was searching for a new cable and after contacting some website and non had some i found this: Xecuter Pin Header Kabel Set
Website to it: http://save-mii.com/tne/product/19/3...abel-Set-.html
Will this fit or do you guys got any other ideas?
:cool:
p.s. i didnt know where to post so i hope i posted in the right section.
↧
Jr programmer issues
Hi I am having issue with jr programmer. It won't do anything it's a solid red light and I can't get rid off it also since soldering the wires up the console turns its self on for no reason I'm lost at what to do and frustrated.
Trying to Download jrunner is the biggest hassle I've ever had because I am having trouble finding all the nesassary downloads.
surely someone can help me please
Trying to Download jrunner is the biggest hassle I've ever had because I am having trouble finding all the nesassary downloads.
surely someone can help me please
↧