Quantcast
Channel: Team Xecuter
Viewing all 6917 articles
Browse latest View live
↧

Something Different!

August 14, 2013, 7:31 am
$
0
0
Not sure if admin will allow me to put this here but,
I don't just do cases i also make desks and workstations.here is the latest desk i built but it was built with storage and the intention to show off my 360 :) hope you like and sorry admin if i stepped the boundary of this modding section

Uploaded with ImageShack.com

Uploaded with ImageShack.com

Uploaded with ImageShack.com

Uploaded with ImageShack.com

Uploaded with ImageShack.com

Uploaded with ImageShack.com

Uploaded with ImageShack.com
↧
Search

RGH2 Jasper CB 6754 Issuue

August 14, 2013, 7:46 am
$
0
0
Hi all, So heres the issue, i only have the Coolrunner Rev C (Still have 10 sitting doing nothing) so chose to have a bash with this as have read around that its poss to get CPU Key mayber after 5 min of boot etc using Autogg for Creating the ECC. Also what i read but need someone here to clarify was to remove the CLK Wire in order to glitch? Its was a french site translated so im sorry if all wrong here but merely looking for advice on getting it to glitch or only other option is the R-JTAG. Thanks
↧
↧

forgot to update before installing r-jtag

August 14, 2013, 9:29 am
$
0
0
This is the third falcon i have had but this time it wasnt on the latest dash i forgot to install the update before writing xell and soldering all the qsb's in :facepalm: i have turned off the jtag qsb and unsoldered the r-jtag 5v wire. i then flashed back the stock nand and inserted a usb with the update on but it keeps failing do i need to remove the qsb's to update?
↧

GENERAL LTU2PCB on 0500 Noise/Play Issues

August 14, 2013, 10:06 am
$
0
0
I've created and written the FW to the PCB 2 times and both result in the same noise. It sounds like the laser is not moving properly on the rails. It makes terrible clicking noises when trying to read a disc and will display mixed media half the time. If I put the original PCB back into the drive, the drive operates normally with no noise issues and no read issues with retail discs. I'm not sure where the issue lies as the original PCB works fine. Thanks in advance.
↧

ANSWERED Does Xecuter DemoN work with Xecuter R-JTAG?

August 14, 2013, 10:49 am
$
0
0
Hey guys,

Does Xecuter DemoN work with Xecuter R-JTAG?
↧
↧

What Case Mod Would People Like To See Or Purchase?

August 14, 2013, 12:58 pm
$
0
0
Im just throwing an idea around.i Have a couple of case mods to do for people but i have a few phat cases sat doing nothing so i was wondering what cases people would like to see or purchase?
Everyone has a dream case so y not make it come true!?
↧

JR-Programmer Help!

August 14, 2013, 1:07 pm
$
0
0
I just recieved my JR-Programmer in the mail today. I ordered it because my nand-x fried. So, I soldered my nand wires in maybe 5 times. The exposed wire on each individual wire is about half an inch. When I solder them in, the wire goes into the point until it can't any more. I keep getting: Flash config 0x000000 can not continue. Or version 00 wrong version. So, I assumed it was my JRP. I go to update/reflash the firmware. Whenever it is writing, it stops and starts creating "xxxxx". Then it says write failed. I have the drivers installed. Once and if we rule out that it is my JRP, I will post pictures of my soldering. I also do not have a multimeter to get readings. Any help?
↧

[WANTED] Wired controller boards

August 14, 2013, 1:19 pm
$
0
0
I need two wired controller boards for an arcade cabinet project. Don't need the shells just the pcb and cables. They don't even need to be microsoft. postage would be to France.

Wife will kill me if I spend too much so thought I'd ask you lot, incase you have any parts I can pick up cheaper than here.
↧
Search

GENERAL Best way to remove eject buttons?

August 14, 2013, 4:51 pm
$
0
0
Sorry if this is in wrong section but I was wondering if there is a tut on the best way to remove the eject and sync buttons as my soldering iron can't seem to get the solder to melt
↧
↧

RGH Corona v2 no post - DBG led blinking but will not boot to xell .. ?

August 14, 2013, 5:23 pm
$
0
0
Hello..

having a bit of a tough time with this corona .. need some input pls.

corona v2 - no post
4gb nand
dash 16203
CB 13181
10cm blue wire to cpu_rst (have also tried to smc_rst)

7.png

j-runner crashed after dumping nand so I don't have full log.. opened nand after for pic and comparison log

Code:
Tuesday, August 13, 2013 9:30:46 PM

J-Runner v0.2 Beta (289) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Nand Initialization Finished
Writing to J:\ from C:\Users\ch@se\Desktop\J-Runner v02 (278) Core Pack\common\ECC\CORONA_4GB.ecc
Done!
in 0:01:721 min:sec:ms
Could not find a part of the path.

===================================================
Tuesday, August 13, 2013 11:20:13 PM

J-Runner v0.2 Beta (289) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Nand Initialization Finished
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same

rater.png


pics of my install including resistance check of post out to ground


2.jpg6.jpg5.jpg4.jpgohms.jpg


console was working before I started... now the DBG light blinks on and off but will not boot xell.. I have nand-x usb update cable hooked up to qsb v3 and have monitor com running with the right port open - at times I have also had rater running .. have tried all the dip switches ... have not tried any caps ... have tried 5 and 50 for post out lenght.. any tips would be greatly appreciated.. thanks
Attached Images
↧

old xbox 360 hacked - now doesn't play games?

August 14, 2013, 6:30 pm
$
0
0
Hi, I have a xbox 360 that was flashed a few years ago. i have a lite-on drive - i think flashed with 1.60 update. It has played copied games without a problem up until 6 months ago. I don't play it very often. Anyway, wanted to play game and put activation disc in and then the game and now it doesn't work. i am on 2.0.15574 dash board. what's up ?
↧

ANSWERED Included DVD Power Cable lost. Can the one from the 360 be used?

August 14, 2013, 6:32 pm
$
0
0
Hi guys! New here, hope I got all the posting rules right...

Anyway, quick question: I have a spare Lite-On 9504 (DG-16D4S) drive I use for my game-backing up needs, so I don't have to take apart my 360 every time I want to backup a new game.
I used to connect the drive to my PC with a CK3 Lite. (Don't have any other connectivity option atm)

Now, I seem to have somehow lost the power cable for the DVD-Drive.
My question being, can I use the original cable that's found IN a 360 to connect the drive to my CK3 Lite and in turn power it up through my PC without any modifications to it?
Asking because I have some spare parts from a RROD 360 laying around and that little cable is part of them, but I don't want to fry my drive OR my PC by connecting it wrong.

I also live in a small country where there're no xecuter products available. Got my CK3 Lite on a trip to Russia. So please no suggestions to man-up and get the USB PRO or the ck3i.

Thanks in advance for any support guys!
Cheers!
↧

RGH Having hard time glitching Jasper

August 14, 2013, 7:43 pm
$
0
0
Hello,
I have my Jasper fitted with a r-jtag and all seems installed properly green light on r-jtag blinks every 5 Sec or so. I have included the logs and screen shot of rater.
I have tried many different dip settings and voltage settings.
Do my rater logs look ok?
Both of the logs are with different setting.

Code:
Version: 10Power Up
Waiting for POST to change
Post 04
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F8
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 06
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 60 - INIT_KERNEL
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 80
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Most Fails(cumulative): 0xA0
Shutdown
Code:
Version: 10Power Up
Waiting for POST to change
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post 70 - INIT_VIDEO_DRIVER
Post F8
Post 78 - INIT_STFS_DRIVER
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post 08
Post F8
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post 10 - Payload/1BL started
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post C8 - SHA_VERIFY
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post F8
Post 08
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F8
Post FC
Post 70 - INIT_VIDEO_DRIVER
Post F8
Post F8
Post F8
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post 70 - INIT_VIDEO_DRIVER
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post FC
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 70 - INIT_VIDEO_DRIVER
Post F8
Post F8
Post F8
Post 80
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post 80
Post F8
Post 80
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post 80
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F8
Post F8
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 70 - INIT_VIDEO_DRIVER
Post F8
Post F8
Post 20 - CB entry point reached
Post F8
Post F8
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post 08
Post F8
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 15 - FETCH_OFFSET
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post FC
Post F8
Post FC
Post F8
Post FC
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post 80
Post F8
Post 88 - Panic - PROGRAM
Post 80
Post F8
Post 80
Post 80
Post F8
Post F8
Post 80
Post F8
Post 1F
Post 15 - FETCH_OFFSET
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post 08
Post F8
Post FC
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post F8
Post F8
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post F8
Post FC
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 15 - FETCH_OFFSET
Post 18 - FETCH_CONTENTS
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Most Fails(cumulative): 0xA0
Shutdown
Sent from my XT912 using Tapatalk 2
↧
↧

HITACHI 79 watch videos

August 14, 2013, 11:04 pm
$
0
0
just cant tell me can i do to watch the videos about the jf thanks in advance
↧

stock temps on a jasper motherboard.

August 17, 2013, 1:33 pm
$
0
0
I have had this system for a while now...... every thing is all good, but freestyle dash temperature reports that my
CPU: around 60 degrees C
GPU: between 69 and 75 degrees C
MEM: 72.8 to 75 degrees C
Case: 47.2 Degrees C

Now this is an rjtag console, and every thing appears fine while playing it, but i was curious if these temperatures are safe for long term playing, or should i do the xclamp fix, and replace the thermal compound, reflowing, and reballing are outside the scope of what i do, considering i dont have the proper tools for it.
↧
Search

Terrible results after layer break with iHas524 DU

August 17, 2013, 2:45 pm
$
0
0
This kprobe graph speaks for itself



I've tried with practically every sensible combination of settings on a fresh install of windows XP with different sata cables and ports, but the result is always the same. I'm using singapore verbs from three different spindles, supplied by two completely unrelated sources.

imgurn fails to verify the second layer because the error correction is inadequate. Needless to say, these discs don't work on the 360.

So far, all I've managed to produce is two dozen or so coasters. Any advice?
↧

RGH Questions

August 17, 2013, 3:38 pm
$
0
0
hello guys can some one help me to rgh my xbox please!?i got xbox 360 slim 4gb corona v2 what do I need to buy to rgh my xbox?thanks
↧
↧

COOLRUNNER Green light doesnt blink anymore...Zephyr stopped RGH'ing

August 17, 2013, 5:08 pm
$
0
0
Dang thing was just working last night. Stopped working today. System started to freeze after a few minutes of dash time, whether I was in Retail dash, FSD, or Xexmenu. This is probably a GPU thing, but I thought it was strange that the DBG light stopped blinking.

The Zephyr stock was 14699, RGH'd last week and updated to 16203. Was fine until today, turned it on a few times, then after it never glitched (usually within 1-2 cycles), I looked inside and the DBG light wasnt flashing.

So I took apart the xbox, checked all wiring and soldering, nothing had changed or moved. Disconnected HDD and DVD, still no DBG light. Tried booting into both RGH NAND and Xell, no DBG light. Reflashed CR Rev B to Zephyr timing files, just in case it lost timing files. Still no DBG light. Flashed ECC file, tried booting with eject button and the DBG light comes on, stays on and does a quick flash, then back on steady. It acted basically the opposite of what the light should do. Unsoldered red 3.3v wire from coolrunner and flashed stock 14699 ROM, got an immediate 0102 RROD. Flashed back the RGH NAND, and no more DBG at all.

Dont really have any JR logs, it was all flashing files and all logs reported back successfully for all flashes.

TX Product(s) used: Coolrunner Rev B, wire install
Console Type: Zephry
NAND size: 16MB
Dashboard version: Stock 14699, RGH 16203
CB version: 4578

Description of problem: see above...

Was the console working before you started: Yesterday was fine, today not so much.


Any ideas would be great. I'm guessing the GPU needs a punch in the face, just dont understand why the DBG light isnt showing correctly. I verified all solder joints with a multimeter to adjacent points on the mobo and at the Coolrunner. No bridges, no lifts, good connections.

Thanks.

P1000220.JPGP1000218.JPGP1000217.JPGP1000216.JPGP1000223.JPGP1000222.JPGznand.jpg
Attached Images
↧

Mod direction/assistance

August 17, 2013, 6:42 pm
$
0
0
Hello,
I appoligize up front if I'm posting this in the wrong location. I searched and looked through the threads but nothing really hit on the info I'm needing. If this needs redirecting, please point me in the right direction.

I need some direction or advice dependent on how you look at it.
What I need to do is JTAG/Glitch my 360 slim and some follow on things I want to do after that call for me to have FreestyleDash installed on my system. I may be able to use a different dashboard. But first things first, JTAG/Glitch my 360.

I have considered installing the DemoN & CR3 as a set. But I'm not 100% positive that will get me where I need to be. Or if there is some additional hardware I need to install. I know I also want the ability to boot in two different dashes or dual boot so I can still go on XBL for needed updates and DLC.

As I mentioned.. If this needs to be redirected to another forum please point it out and I'll be happy to go there.

Thanks..
↧

Donor Dummy.bin

August 17, 2013, 9:11 pm
↧
Viewing all 6917 articles
Browse latest View live
Search