Quantcast
Channel: Team Xecuter
Viewing all 6917 articles
Browse latest View live
↧

ANSWERED Can still use DGX 1.0S on 16537 ???

September 12, 2013, 9:50 am
$
0
0
Hi, I just want to extract the CPU Key to view the DVD Key and change PCB LTU. I don't have JR Programmer to convert to RGX and if its possible and not necessary buy more glitchips.

Can use it on Dash 16537 ? Thanks
↧
Search

JTAG RJTAG 1.1 ZEPHYR : POST A0

September 12, 2013, 11:58 am
$
0
0
Console Type: Zephyr
NAND size: 16
Dashboard version: 2.0.16197
CB version: 4569
Screenshot of NAND details from J-Runner:

nandscreen.PNG
J-Runner log - Monitor POST:

Code:
Version: 10
Press Escape to exit
Waiting for POST to change
Post 22 - INIT_SECENG
Post 22 - INIT_SECENG
Post EC
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 40 - Entrypoint of CD reached
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 12 - FSB_CONFIG_RX_STATE
Post 13 - FSB_CONFIG_TX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 16 - FETCH_HEADER
Post 17 - VERIFY_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1E - BRANCH
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post A0 - Panic - VERIFY_SECOTP_6
Done!

Image of R-JTAG board, Images of close-up soldering to motherboard:

IMG_0176_risultato.jpgIMG_0177_risultato.jpgIMG_0178_risultato.jpgIMG_0179_risultato.jpgIMG_0180_risultato.jpg
Description of problem:

Hi to all!
I have try to glitch whit RJTAG one zephyr but the post stop always at A0
My configuration:

RJTAG:
  • DIP 7-8 OFF
  • I try to put ON the DIP 1,2,3,4,5,6
  • I try whit 1,8 / 1,2 and JUMP open (for voltage)


    • but, always stop at A0!



JTAG QSB:
  • JTAG AUD CLAMP = ON
  • SWITCH AND JUMP 470
  • JUMP 1-3 CLOSED


Thank you to all in advanced !

Was the console working before you started: Y
Attached Images
↧
↧

For those who say that r-jtag does not work on xbox 360 Zephyr ....

September 12, 2013, 12:16 pm
$
0
0
I am happy to post a video where r-jtag, version 1.1, runs perfectly on xbox 360 Zephyr :)

The new firmware 1.1 works great. The only DIP ON is 2, using the new configuration for Zephyr (DIP 7 and 8 down).

Team Xecuter never wrong ;)

↧

FIXED After writing ECC on Trinity Xbox is showing red dot

September 12, 2013, 12:28 pm
$
0
0
I tried RGH a Trinity using a DGX this morning but couldn't get it to boot Xell. After some reading it seems that DGX on Trinity is very tricky so I removed the DGX and installed a Coolrunner RevC that I had laying around from an old phat I couldn't get to glitch many months ago. I got it to boot Xell in less than 10seconds but as I was getting the CPU key the Xbox turned off and displayed a red dot. Now if I try to turn on the Xbox the fans don't spin up and a red dot comes up immediately after pressing the power button. I don't have pics but here is my j-runner log. Any ideas as to what causes this? I had to remove the xclamp during the RGX install and I removed the thermal paste and reapplied some MX4 before re-installing the xclamp.



================================================== =
September 12, 2013 10:19:53 AM


J-Runner v0.3 Beta (1) Started






Checking Files
Downloaded *xeBuild/launch.xex
Downloaded *xeBuild/updserv.rar
Finished Checking Files
RGH2 Selected
Version: 03
Flash Config: 0x00023010
CB Version: 9188
Trinity
Reading Nand to C:\Users\Paul\Desktop\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 1:59 min:sec


Reading Nand to C:\Users\Paul\Desktop\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Reading Nand
RGH2 Selected
Nand Initialization Finished
Done!
in 1:59 min:sec


Comparing...
Nands are the same
Checking Console..
Version: 03
Flash Config: 0x00023010
CB Version: 9188
Trinity
Comparing...
Nands are the same


* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 3.1
CB_A: 9188
CB_B: 9188
CD (image): 9452
CD (decrypted): 8453
* this image will be valid *only* for: trinity (slim)
* patching SMC...
Patching Trinity version 3.1 SMC at offset 0x13B3
* patching CB_B...
patchset for 9188 found, 4 patch(es)
* constructing new image...
* base size: 70000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x9ABF (0x1AC0 bytes) CB_A 9188
0x9AC0..0x112BF (0x7800 bytes) CB_B 9188
0x112C0..0x172BF (0x6000 bytes) CD 8453
0x172C0..0xBFFFF (0xA8D40 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into output\image_00000000.ecc


Version: 03
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:09 min:sec
↧

no more xell, flashed jtag with rgh nand.

September 12, 2013, 1:16 pm
$
0
0
As title says I updated my mates xbox he said it was rgh, so patched his nand using jrunner. Flashed the nand on his xbox in xell, Rebooted and now no boot in normal mod eand no xell on eject. I have ck3 and nand x What qsb's can I use to get xell back on the machine. Can I use the r-jtag ones ?

Thanks for taking the time to read this.
↧
↧

RGH bb 512 rgh2 freezing

September 12, 2013, 1:32 pm
$
0
0
Have cr rev c boot times not bad under 2 minutes sometimes less dash 16532 or latest. Boots normal no freezing during start up. But when I try to play games on reg dash or freestyle would always freeze about a minute or more into game and would start glitching again. So tried playing off dvd stock firmware same issue tried buliding another image without dashlaunch using j runner newest ver . Same issue. Tried flashing it through xell and flash 360 same still freezes through external hd and internal and dvd drive. But I can watch a movie on drive no freezing left it on all night and still playing this morning weird. So flashed back to stock remove cr clean points same issue. Any suggestions also replaced with artic silver compound
↧

FIXED Console won't boot with Xebuild 16537 image, but will boot with xell

September 12, 2013, 3:12 pm
$
0
0
TX Product(s) used: Coolrunner Rev C, and DemoN
Console Type: Jasper BB
NAND size: 256
Dashboard version: 2.0.16537
CB version: 6754

Description of problem: xeBuild Image will not boot on demon

Was the console working before you started: Yes

The problem i am having is that when i write an xeBuild 16537 image to the DemoN i cant even turn on my 360, but when i write an ECC after re-flashing the DemoN to stock firmware it boots fine into Xell. Also the Retail NAND on the 360 itself boots fine with no problems. I dont believe i need to post pictures of my soldering as the Coolrunner and DemoN work in unison to glitch into Xell, but if you need to see images i will post them.

It wouldn't let me upload the NAND log but, here it is

https://mega.co.nz/#!GI1hRDBZ!IMn49j9X0fKR0Cq4m-9X7BWkBT5hrPwlo7oMe5gQvp0


xeBuild Image.pngRetail NAND.png



IMG_0092.JPGIMG_0095.JPGIMG_0091.JPGIMG_0094.JPGIMG_0097.JPGIMG_0093.JPGIMG_0096.JPG


Log.txt
Attached Images
Attached Files
↧

Xecuter Demon Slim Usb Module

September 12, 2013, 3:16 pm
$
0
0
Any one have an extra external xecuter demon slim usb module I broke mine and need another thank you.
↧
Search

What is this?

September 12, 2013, 5:46 pm
↧
↧

Updated Zephyr RGH resulted in RROD

September 14, 2013, 2:19 pm
$
0
0
I followed the sticky guide on how to update JTAG to 16202.

My RGH1 Zephyr was on 2.0.16197.0 and the goal was to get it to 16202 or higher.
After building the image (updflash.bin) in J-Runner I used Flash360 to flash. (A-B-START-START-A and then BACK-BACK, and I waited 60 seconds with everything unplugged)
When I turned on the 360 I had the red ring, 3 lights.

I have multiple backups of my nand, cpu key and dvd key just in case.

What options do I have in this situation?
If I wanted to have it sent in for a repair, where would be best? (I am in New York)

Thank you for your time.
↧

JungleFlasher v0.1.96 (Beta 323)

September 14, 2013, 2:22 pm
$
0
0
We have a brand new version of JungleFlasher for all you firmware fans :)

JungleFlasher v0.1.96 (Beta 323) (Download is on XBINS)

Changelog:

Code:
JungleFlasher 0.1.96(323)
========================================
support for Xecuter additional LTU2 files for DG-16D4S support
added extraction for DG-16D4S serial info from original drive at KeyCR time for LTU2 and LTU1
↧

serial.xecuter.com down

September 14, 2013, 3:27 pm
$
0
0
Went tor register some stuff and I'm getting a 502 Bad Gateway.
↧

LTU2 firmware for DG16-D4S 1071

September 14, 2013, 3:59 pm
$
0
0
Just wondering where to get the firmware from as i have an LTU2 pcb now and the original drive was DG16-D4S 1071 looked on xbins any help on this.
↧
↧

About Rater on cr3 pro

September 14, 2013, 4:01 pm
$
0
0
Hi guys in the middle of a demon and coolrunner cr3 pro install on a corona v3 console and all is goo so far, after i finish the install, the tuning begins and i know no timing files are to be installed as they are pre loaded. Since my last demon and coolrunner install which was on a phat console years ago the rater is new to me. I have read through it a few times now and looked a some examples and tried my best to digest it ll in but could someone explain in a simplified way what the rater and how to approach it with my corona v3? Thought id try and find a video that would explain as i am more a kinesthetic learner butwith no success.

Thanks
↧

RJTAG not booting, not even xell

September 14, 2013, 4:22 pm
$
0
0
Console Type: Jasper
NAND size: The one that does not require a BB upgrade
Dashboard version: Latest
CB version: No idea

Description of problem:

Trying to turn on my console, not turning on I have a demon and I did try to kind of flick the cable going to the demon on the outside of the xbox to switch between stock and RGH and that does not work. Even tried taking the cable off then back on. It does this a lot and I fixed the other times by messing with the cable. I am having a night mare with this console, sometimes the leds won't even go on. I have a 50/50 chance of this console booting into RGH but on stock it boots more often but both are not booting. Power is coming through the Xbox. Also when I say booting I mean not even turning on like there is no video popping on the TV or LED light from the manual on/off button. :facepalm:

Was the console working before you started: Yes
↧
Search

i cant make rgh2 for my xbox360 trinty dash 16202

September 15, 2013, 12:47 am
$
0
0
hi for all

i have dump the nand man many time i got error
Error: 202 writing block 34
Error: 202 writing block 36A

and some time i have get other code error
Error: 250 reading block 34
Error: 258 reading block 369

i don't know why!!

and i have create ecc file and write it
but i cant boot xell
i don't know why?



this is log from my JR V.3 UPDATED:

http://www.alm5zn.com/upfiles/Ddq31210.jpg

Code:
===================================================
Sunday, September 15, 2013 09:48:40 ص

J-Runner v0.3 Beta (1) Started



Checking Files
Downloaded *xeBuild/launch.xex
Downloaded *xeBuild/updserv.rar
Finished Checking Files
Downloaded *xeBuild/16203/bin/addon.idx
Downloaded *xeBuild/16203/bin/nointmu.bin
Downloaded *xeBuild/16203/bin/nolan.bin
Downloaded *xeBuild/16203/bin/patches_falcon.bin
Downloaded *xeBuild/16203/bin/patches_fat.bin
Downloaded *xeBuild/16203/bin/patches_g2corona.bin
Downloaded *xeBuild/16203/bin/patches_g2falcon.bin
Downloaded *xeBuild/16203/bin/patches_g2jasper.bin
Downloaded *xeBuild/16203/bin/patches_g2mcorona.bin
Downloaded *xeBuild/16203/bin/patches_g2mtrinity.bin
Downloaded *xeBuild/16203/bin/patches_g2trinity.bin
Downloaded *xeBuild/16203/bin/patches_g2zephyr.bin
Downloaded *xeBuild/16203/bin/patches_jasper.bin
Downloaded *xeBuild/16203/bin/patches_trinity.bin
Downloaded *xeBuild/16203/bin/patches_xenon.bin
Downloaded *xeBuild/16203/bin/patches_zephyr.bin
Downloaded *xeBuild/16203/_retail.ini
Finished Checking Files
Version: 03
Flash Config: 0x00023010
CB Version: 9231
Trinity
Reading Nand to C:\Users\abo jana\Desktop\J-Runner\J-Runner+v02+Beta+(288)+Core+Pack    new\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 34
Error: 258 reading block 369
Done!
in 2:14 min:sec

Reading Nand to C:\Users\abo jana\Desktop\J-Runner\J-Runner+v02+Beta+(288)+Core+Pack    new\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Reading Nand
RGH2 Selected
Nand Initialization Finished
Error: 250 reading block 34
Error: 258 reading block 369
Done!
in 2:14 min:sec

Comparing...
Bad Block ID  0034 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID  0369 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0034 [Offset: 0xD6800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0369 [Offset: 0xE11200]
Bad Blocks Remapped
Bad Block ID  0034 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID  0369 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0034 [Offset: 0xD6800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0369 [Offset: 0xE11200]
Bad Blocks Remapped
Nands are the same
ECC created
Version: 03
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Error: 202 writing block 35
Starting remapping process
Remapping Block 35 @ 3FF
Done!
in 0:11 min:sec

Version: 03
Flash Config: 0x00023010
Writing Nand
nanddump1.bin
Error: 202 writing block 34
Error: 202 writing block 36A
Done!
in 2:12 min:sec

Version: 00
Wrong Version.
Version: 03
Flash Config: 0x00023010
Writing Nand
nanddump1.bin
Error: 202 writing block 34
Error: 202 writing block 36A
Done!
in 2:12 min:sec

Version: 03
Flash Config: 0x00023010
CB Version: 9231
Trinity
Reading Nand to C:\Users\abo jana\Desktop\J-Runner\J-Runner+v02+Beta+(288)+Core+Pack    new\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 34
Error: 258 reading block 369
Done!
in 2:14 min:sec

Reading Nand to C:\Users\abo jana\Desktop\J-Runner\J-Runner+v02+Beta+(288)+Core+Pack    new\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Reading Nand
Nand Initialization Finished
Error: 250 reading block 34
Error: 258 reading block 369
Done!
in 2:14 min:sec

Comparing...
Bad Block ID  0034 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID  0369 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0034 [Offset: 0xD6800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0369 [Offset: 0xE11200]
Bad Blocks Remapped
Bad Block ID  0034 Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID  0369 Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0034 [Offset: 0xD6800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 0369 [Offset: 0xE11200]
Bad Blocks Remapped
Nands are the same
ECC created
Version: 03
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Error: 202 writing block 35
Starting remapping process
Remapping Block 35 @ 3FF
Done!
in 0:11 min:sec
↧

trinity rgh update error j-runner Flash Config: 0x00000000 Can not Continue error

September 15, 2013, 5:54 am
$
0
0
TX Product(s) used: nand-x
Console Type: Trinity
NAND size: 16
Dashboard version: 2.0.16203
CB version: 9188
Image of Coolrunner:
Images of close-up soldering to motherboard:IMAG0152.jpgIMAG0154.jpg

Description of problem: Updated Console, now no powerup just beeps when power or eject pressed. Tried bridging the i/O4, i/O5, i/O6, i/O7 together (FT1T5,FT1T6,FT1T7,FT1T8) but still get the Untitled.png.
Was the console working before you started: Was working fine as a RGH before updating.

================================================== =
15 September 2013 13:03:08

J-Runner v0.3 Beta (1) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Filechecks disabled - No Filechecks carried out
Version: 03
Flash Config: 0x00000000
Can not Continue
Version: 03
Flash Config: 0x00000000
Can not Continue
Version: 03
Flash Config: 0x00000000
Can not Continue
Version: 03
Flash Config: 0x00000000
Can not Continue
Attached Images
↧
↧

GENERAL What drive can be used to take legal backups of my games?

September 15, 2013, 9:19 am
$
0
0
Hi there,

I've read the rules and i know it says no torrents or anything along that nature but i'm looking to make legal backups of my games. I've seen someone mention a drive on here before but i can't quite remember the name of it or how they did it.

I'm sorry moderators if this breaks the rules but as far as i'm aware taking legal backups is okay.

Regards,
↧

X360 4gb; Dashlaunch bricked; Missing nand

September 15, 2013, 9:42 am
$
0
0
I was at Dashlaunch 3.07 and was updating to 3.08 but once it restart for the update it never turned back on. Now it only boots into Xell. My nand backup is on a laptop at my brothers(which he is away for a couple days). I have the CPU key i snap-pic'd from Xellious. How would I go to create a nand to restore the console with the CPU key and a donor nand?
↧

[WANTED] Corona Postfix v2 and Phat Fullpost v2 - Maryland, Usa

September 15, 2013, 10:00 am
$
0
0
As in topic, looking for these if anyone has them. Xconsoles doesnt seem to have the phat full post by itself, so I figure I'll check here and get both things I need at once.

Let me know.

Thanks
↧
Viewing all 6917 articles
Browse latest View live
Search